G3 Series PROFIBUS-DP Technical Manual - ASCO Numatics
G3 Series PROFIBUS-DP Technical Manual - ASCO Numatics
G3 Series PROFIBUS-DP Technical Manual - ASCO Numatics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Error Messages<br />
<strong>G3</strong> <strong>Series</strong> <strong>PROFIBUS</strong>‐<strong>DP</strong> <strong>Technical</strong><br />
<strong>Manual</strong><br />
The following are automatic error messages that are displayed when specific faults occur during operation:<br />
SUB-BUS SHORT<br />
SHORTED COIL<br />
NO. X<br />
MISSING MODULE<br />
NUMBER X<br />
VALVE/ OUTPUT<br />
POWER OFF<br />
UNSWITCHED<br />
POWER LOW<br />
TD<strong>G3</strong>PTTM1-2EN 02/09<br />
Subject to change without notice<br />
www.numatics.com/g3<br />
Displayed when a short circuit condition is<br />
detected on the Sub-Bus power lines.<br />
Displayed when a short circuit condition is<br />
detected on a valve coil<br />
Displayed when a Sub-Bus module that had<br />
been previously installed becomes absent from<br />
the configuration<br />
Displayed when +24 VDC on<br />
Pin No. 1 and 5 (Valves and Outputs) is not<br />
present or below 22 VDC<br />
Displayed when +24 VDC on<br />
Pin No. 2 and 4 (Node and Inputs) is below<br />
19 VDC<br />
Page 25
Change language