ER-200D Personal Noise Dosimeter with Data Logging User Manual

More documents

Recommendations

Info

Data Graphs · The data graph displays dose data from the run highlighted in the Data Table. · To display graphs for other runs, select the run by clicking on the line in the Data Table that contains the run data. · Dose is displayed by blue fill on the graph and indicated numerically on the right side of the graph. Normal Runs Leq (red) Dose % (blue) · Leq (Equivalent Continuous Level) is displayed on the left side of the graph and indicated with a red line on the graph when the Leq box is checked. Leq is only available for Real-Time Data. · For Normal runs, only Real-Time Data are available. · In Normal Mode, dose values are obtained every 220 msec and summed over a 3.75 minute interval. 48
QuickCheck Runs · · QuickCheck run time is approximately 2 minutes. Estimated dose per hour is displayed in the data table. Predictive Data Feature Runs can be viewed as Real-Time Data or Predictive Data. Selecting Predictive Data allows the user to see estimated dose for various time periods. Prediction Length (in Hours) is adjustable by the user. Here, “1” was entered. 49 Real-time data are displayed Dose % is 160% for 1 hour Predictive Data can be displayed in Days, Hours, Minutes or Seconds.
Page 1 and 2: Personal Noise Dosimeter 1 User Man
Page 3 and 4: Introduction Hearing loss from loud
Page 5 and 6: Identification of Parts A Microphon
Page 7 and 8: Windscreen Windscreen fits on top o
Page 9 and 10: Status Check Power ON · Press and
Page 11 and 12: Interpreting Results Normal Mode (B
Page 13 and 14: Interpreting Results QuickCheck Mod
Page 15 and 16: What Dose % Means Noise dose is a m
Page 17 and 18: Data Logging Normal and QuickCheck
Page 19 and 20: Specifications The default settings
Page 21 and 22: Risk Factors for Hearing Loss Healt
Page 23 and 24: About the Utility Suite The ER-200D
Page 25 and 26: Accept all licensing agreements. Cl
Page 27 and 28: Connect the USB cable to the ER-200
Page 29 and 30: Select “Install the software auto
Page 31 and 32: Utility Suite Screens Open the ER-2
Page 33 and 34: · Describe Highlighted Run: Opens
Page 35 and 36: The Setup Screen displays the facto
Page 37 and 38: Allow Previous Results to Be Overwr
Page 39 and 40: Restore Default Settings · · ·
Page 41: Data Table All data runs are displa
Page 45 and 46: Saving Data Reports are created and
Page 47 and 48: Excel Reports and Data Files The de
Page 49 and 50: Important Points (in alphabetical o
Page 52: 61 Martin Lane • Elk Grove Villag

ER-200D Personal Noise Dosimeter with Data Logging User Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?