14.10.2013 Views

001-055 Alfa 156 GB - Alfa Romeo serviss

001-055 Alfa 156 GB - Alfa Romeo serviss

001-055 Alfa 156 GB - Alfa Romeo serviss

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

STARTING THE ENGINE<br />

The engine can be started with the gear<br />

engaged or in neutral (N), provided that the<br />

brake pedal is pressed down.<br />

WARNING Keep the brake pedal<br />

pressed during the starting operation. As the<br />

brake pedal stiffens if it is pressed repeatedly<br />

with the engine off, in this situation, to<br />

allow the engine to be started, it is necessary<br />

to increase the pressure exerted on the<br />

pedal itself.<br />

After starting, the gearbox automatically<br />

sets to neutral, the display shows the letter<br />

(N) and the system selects the operating<br />

mode stored before switching off.<br />

WARNING<br />

If the engine fails to start<br />

with the gear engaged, the<br />

driver is alerted of the potentially<br />

dangerous situation due to the fact<br />

that the gearbox has automatically<br />

set to neutral by the buzzer and<br />

the display on the rev counter.<br />

TURNING THE ENGINE OFF<br />

AND SYSTEM DEACTIVATION<br />

Turning the ignition key to STOP the engine<br />

switches off but the Selespeed system<br />

still remains active, waiting for the vehicle<br />

to stop completely. After about 2 - 4 seconds<br />

from when the key has been turned to the<br />

STOP position, the hydraulic part is deactivated<br />

and immediately afterwards the display<br />

on the rev counteralso goes out ; the<br />

Selespeed system is only deactivated at this<br />

point.<br />

The gear selected before turning the engine<br />

off remains engaged.<br />

If the engine stops with the gearbox in<br />

neutral (N), the buzzer draws the attention<br />

of the driver so that the vehicle can be put<br />

in safety conditions engaging the first gear<br />

(1) or reverse (R). In this case, it is necessary<br />

to turn the ignition key to MAR and<br />

with the brake pedal pressed, engage first<br />

gear (1) or reverse (R).<br />

WARNING<br />

NEVER leave the car with<br />

the gearbox in neutral (N).<br />

WARNING<br />

Never remove the key<br />

when the car is on the<br />

move, because in addition to the<br />

fact that the Selespeed system<br />

would not work properly until<br />

stopping the car, the steering<br />

wheel would automatically lock at<br />

the first turn.<br />

WARNING<br />

It is absolutely necessary<br />

to turn off the engine consequently<br />

deactivating the Selespeed<br />

system keeping the brake<br />

pedal pressed: release the pedal<br />

ONLY when the display on the rev<br />

counter goes off.<br />

GETTING TO KNOW YOUR CAR<br />

145

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!