001-055 Alfa 156 GB - Alfa Romeo serviss

If it is not possible to reach the prescribed
pressure, move the car forwards or backwards
for about 10 metres, so that the sealer
is distributed inside the tyre, then repeat
inflation.
If, in spite of the last operation, the prescribed
pressure is not achieved, do not
move the vehicle and contact Alfa Romeo
Authorized Services.
Once the correct tyre pressure has been
reached, start driving immediately so that
the sealer is distributed evenly inside the
tyre.
fig. 15
A0B0336m
WARNING
Place the sticker in a position
where it can be clearly
seen by the driver as a notice
that the tyre has been treated with
the quick repairing kit. Drive carefully
especially in a bend. Do not
overcome 80 km/h. Avoid sudden
acceleration or braking.
After about 10 minutes, stop and check
the tyre pressure once again; remember to
engage the handbrake.
fig. 16
A0B0337m
WARNING
If the pressure is below
1,3 bars, do not drive any
further; FIX & GO cannot guarantee
proper hold because the tyre is
too much damaged. Contact Alfa
Romeo Authorized Services.
Conversely, if at least 1,3 bars are
detected, restore the correct pressure
(with the engine running and
the handbrake engaged) and start
driving the car with great care.
IN AN EMERGENCY
215