001-055 Alfa 156 GB - Alfa Romeo serviss

IF THE VEHICLE IS TO BE TOWED
The tow ring supplied with the vehicle is
housed in the tool box under the boot mat.
To install the tow ring, proceed as follows:
– Take the tow ring from the tool box.
– Remove the cover (A) snap-fitted on the
front (fig. 77) or rear bumper (fig. 78).
If the supplied flat screwdriver is used to carry
out this operation, protect the tip with a
soft cloth to prevent damaging the car.
fig. 77
A0B0593m
– Firmly screw the ring in its housing.
WARNING
Carefully clean the threaded
housing before tightening
the ring. Before beginning to
tow the car make sure that the
tow ring is firmly tightened in its
threaded housing.
fig. 78
A0B0594m
WARNING
Before beginning to tow
the car, turn the ignition
key to MAR and then to STOP, do
not remove it. Removing the key
automatically engages the steering
lock resulting in the impossibility
to steer the wheels. When towing
remember that without the help of
the servo-brake and power steering,
it is necessary to exert more
effort on the brake pedal and for
steering. Do not use flexible cables
for towing and avoid jerks. During
towing operations make sure
that fastening the joint to the car
does not damage the components
in contact with it. When towing the
car it is compulsory to comply with
the specific traffic regulations concerning
both the towing device and
behaviour on the road.
IN AN EMERGENCY
243