001-055 Alfa 156 GB - Alfa Romeo serviss

CAR MAINTENANCE
274
SPRAY JETS
Make sure that the windscreen and headlight
(where applicable) washer jets deliver
a jet of fluid which is adequate and correctly
directed.
If the spray devices are not working check
that the supply circuit is not blocked. If necessary
unblock the nozzles using a needle.
HEADLIGHT WASHERS
(optional for versions/markets
where applicable)
Regularly check that the spray jets are intact
and clean fig. 28.
If it is necessary to direct the jet, contact
an Alfa Romeo Authorized Service.
fig. 28
A0B0581m
BODYWORK
PROTECTION FROM
ATMOSPHERIC AGENTS
The main causes of corrosion are:
– atmospheric pollution
– salty air and humidity (coastal areas, or
hot humid climates)
– seasonal environment conditions.
Not to be underestimated is also the abrasive
action of wind-borne atmospheric dust
and sand and mud and gravel raised by other
vehicles.
On your Alfa 156, Alfa Romeo has
implemented the best manufacturing technologies
to effectively protect the bodywork
against corrosion.
These include:
– Painting products and systems which
give the car particular resistance to corrosion
and abrasion.
– Use of galvanised (or pretreated) steel
sheets, with high resistance to corrosion.
– Spraying the underbody, engine compartment,
wheel arches and other parts with
highly protective wax products.