001-055 Alfa 156 GB - Alfa Romeo serviss

– Change the bulb (C-fig. 62) which
is pressure-fitted.
– Refit the cover (B-fig. 61).
– Re-install the light inserting it in the correct
position firstly on one side and then
pushing on the other until the tab clicks.
fig. 61
fig. 62
A0B0194m
A0B0193m
LUGGAGE COMPARTMENT
LIGHT
To remove the bulb proceed as follows:
– Open the boot.
– Turn the fastening buttons (A-fig. 63)
until they click and lower the trim.
– Withdraw the clear plastic cover and
bulb (A-fig. 64) using a flat-bladed screwdriver.
fig. 63
A0B0192m
– Replace the bulb (B-fig. 65)of the
cylindrical type pulling it outwards ensuring
that the new bulb is correctly positioned between
the contacts.
– Refit the transparent cover ensuring that
the retaining tabs click into place (Cfig.
65).
fig. 64
fig. 65
A0B0191m
A0B0190m
IN AN EMERGENCY
233