14.10.2013 Views

001-055 Alfa 156 GB - Alfa Romeo serviss

001-055 Alfa 156 GB - Alfa Romeo serviss

001-055 Alfa 156 GB - Alfa Romeo serviss

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

STARTING<br />

THE ENGINE<br />

WARNING The car is fitted with an electronic<br />

engine lock device. If the engine fails<br />

to start see “<strong>Alfa</strong> <strong>Romeo</strong> CODE system”.<br />

In addition to the notes<br />

and specifications given below<br />

we recommend that,<br />

during the initial period, you do not<br />

drive to full vehicle performance<br />

(for example excessive acceleration,<br />

long journeys at top speed,<br />

hard braking, etc.).<br />

WARNING<br />

Running the engine in confined<br />

areas is extremely<br />

dangerous. The engine consumes<br />

oxygen and produces carbon<br />

monoxide which is a highly toxic<br />

and lethal gas.<br />

CORRECT USE OF THE CAR<br />

The ignition switch is fitted with a safety<br />

device which obliges the driver to return the<br />

ignition key to the STOP position before repeating<br />

the starting operation if the engine<br />

does not start immediately.<br />

Similarly, when the engine is running, the<br />

device prevents the key being moved from<br />

the MAR to the AVV position.<br />

To avoid useless consumption<br />

of power and<br />

possible draining the battery,<br />

never leave the ignition key<br />

in the MAR position when the engine<br />

is not running.<br />

PROCEDURE FOR PETROL<br />

ENGINES<br />

WARNING It is important not to press<br />

the accelerator until the engine has started.<br />

1) Make sure the handbrake is engaged.<br />

2) Move the gear lever to neutral.<br />

3) Fully depress the clutch pedal so that<br />

the starter motor is not forced to crank the<br />

toothed wheels of the gearbox.<br />

4) Ensure that the systems and electrical<br />

devices, especially if they absorb high quantities<br />

of energy (e.g. heated rear windscreen)<br />

are switched off.<br />

5) Turn the ignition to the AVV position<br />

and release it as soon as the engine starts.<br />

6) If the engine does not start, return the<br />

key to the STOP position and repeat the<br />

operation.<br />

WARNING If it is difficult to start the engine<br />

do not insist with extended attempts<br />

which may damage the catalyzer but contact<br />

<strong>Alfa</strong> <strong>Romeo</strong> Authorized Services.<br />

CORRECT USE OF THE CAR<br />

189

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!