001-055 Alfa 156 GB - Alfa Romeo serviss

SIDE DIRECTION INDICATORS
To replace the bulb proceed as follows:
– Push the transparent cover towards the
rear of the car to compress the tab (Afig.
38). Release the front part and remove
the unit.
– Turn the bulb holder counter-clockwise
(B-fig. 39) and remove it from the transparent
cover (D-fig. 39).
fig. 38
A0B0219m
– Withdraw the bulb (C-fig. 39) which
is of the pressure-fitted type and replace it.
– Insert the bulb holder (B-fig. 39) in
the transparent cover (D-fig. 39) and position
the unit ensuring that the clip clicks into
place (A-fig. 38).
Take care not to damage
the bodywork or the transparent
cover when removing
the side direction indicator unit.
fig. 39
A0B0220m
REAR LIGHT UNITS
Rear light units contain the reversing lights,
rear fog guards, direction indicators, number
plate lights, stop/side lights and the additional
stop light (3rd stop).
REVERSING LIGHTS AND REAR
FOG GUARDS
To replace the bulbs proceed as follows:
– Open the boot.
– Slacken the screws (A or B-fig. 40)
fastening the boot trim in correspondence
with the light concerned.
fig. 40
A0B0211m
IN AN EMERGENCY
227