Exterior Lighting 2012/2013 - Fergin AB

Superlight 70/125/150 W
Superlight 150 W, axially symmetrical wide beam
Part number Colour Lamp Lampholder Weight Half beam angle γ
8 802 041 009 black HIT-DE 150 W
HIT-DE-CE 150 W
HST-DE 150 W
C 0 – 180 C 90 – 270
Rx7s 7.9 kg 27° 68°
Superlight 150 W, axially symmetrical wide beam instant light*
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 803 041 009 black HIT-DE 150 W
HIT-DE-CE 150 W
HST-DE 150 W
Rx7s 7.9 kg 27° 68°
* Instant light floodlights
An electronically controlled additional 150 W halogen lamp
(B15d) automatically provides partial illumination ( e.g. for safety
reasons) during the time required for the discharge lamp to ignite
or re-ignite.
Superlight 80/125 W, axially symmetrical wide beam
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 800 046 009 black HME 80/125 W E 27 7.2 kg 99° 78°
Superlight 80/125 W, axially symmetrical wide beam, instant light*
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 801 046 009 black HME 80/125 W E 27 7.2 kg 99° 78°
Superlight 70 W, axially symmetrical wide beam
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 807 046 009 black HSE 70 W E 27 6.1 kg 99° 78°
Superlight 70 W, axially symmetrical wide beam, instant light*
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 806 046 009 black HSE 70 W E 27 6.1 kg 99° 78°
126 Superlight
Lamps (see page 364 –365)
Superlight 70/125/150 W
Axially symmetrical wide beam
For metal halide lamps (HIT-DE),
ceramic metal halide lamps (HIT-DE-CE),
high pressure mercury lamps (HME) and
high pressure sodium lamps (HSE/HST-DE)
protection class I, IP65
windage area AW 0.09 m 2
die cast aluminium housing, polyester powder
coated, axially symmetrical high gloss aluminium
reflector, all exterior steel parts are stainless steel,
tempered safety glass, silicon gasket, closure with
4 stainless steel screws, hinged front frame,
mounting bracket powder coated aluminium with tilt
scale: 4 drilled holes Ø 8.5 mm, spacing 70 mm
(120 mm), 1 centre hole Ø 17 mm, tilt range 150°,
M20 cable gland, integral LPF ballast and ignitor
when required, HPF available on request
(see page 362), supplied without lamp.
HIT-DE HIT-DE-CE HST-DE HME HSE
90
90
60
60
250
500
750
100
200
I (cd/klm)
90
60
I (cd/klm)
60
90