Exterior Lighting 2012/2013 - Fergin AB

Superlight 250 W
Superlight 250 W, axially symmetrical wide beam, for elliptical shaped lamps, HIE/HSE
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 852 048 005 black HIE 250 W
HSE 250 W
E40 16.0 kg 56° 83°
Superlight 250 W, axially symmetrical wide beam, for elliptical shaped lamps, HME
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 854 048 009 black HME 250 W E40 16.0 kg 56° 83°
130 Superlight
Superlight 250 W
Axially symmetrical wide beam
for elliptical shaped lamps
For metal halide lamps (HIE),
high pressure mercury lamps (HME) and
high pressure sodium lamps (HSE)
protection class I, IP65
windage area AW 0.15 m 2
die cast aluminium housing, polyester powder
coated, axially symmetrical high gloss aluminium
reflector, all exterior steel parts are stainless steel,
tempered safety glass, silicon gasket, closure with
4 stainless steel screws, hinged front frame,
mounting bracket powder coated aluminium with tilt
scale: 6 drilled holes Ø 8.5 mm, spacing 70 mm
(120 mm, 200 mm), 1 centre hole Ø 22 mm, tilt
range 150°, M20 cable gland, integral LPF ballast
and ignitor when required, HPF available on request
(see page 362), supplied without lamp
The tilt scale
allows for precise
directional aiming
of the floodlights.
Lamps (see page 364 –365)
90
60
90
60
HIE HSE HME
150
300
600
150
300
600
I (cd/klm)
90
60
I (cd/klm)
90
60