Exterior Lighting 2012/2013 - Fergin AB

Nightline B with wall arm
Nightline B with wall arm, HIT-DE/ HIT-DE-CE
Part number* Colour Lamp Lampholder Weight Half beam angle γ
8 937 741 009 black HIT-DE 70 W
8 937 761 009 white HIT-DE-CE 70 W
8 937 751 009 silver grey
*Can also be supplied with electronic ballast upon request.
C 0 –180 C 90 – 270
Rx7s 6.5 kg 93° 79°
Nightline B with wall arm, HIT-DE/ HIT-DE-CE with electronic ballast
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 –180 C 90 – 270
8 938 746 009 black HIT-DE 150 W Rx7s 5.7 kg 91° 81°
8 938 766 009 white HIT-DE-CE 150 W
8 938 756 009 silver grey
318 Nightline B with wall arm
Nightline B
with wall arm
For metal halide lamps (HIT-DE) and
ceramic metal halide lamps (HIT-DE-CE)
protection class I, IP65
die cast aluminium housing, polyester powder
coated, axially symmetrical high gloss aluminium
reflector, all exterior steel parts are stainless steel,
tempered prismatic safety glass, silicon gasket,
closure with 4 stainless steel screws, wall box:
4 drilled holes Ø 10 mm, spacing 74 x 145 mm,
cable entry Ø 7–10 mm, recessed or surface
mounted cable, knuckle joint with tilt range 180°,
LPF ballast and ignitor or electronic ballast in wall
box, HPF available on request (see page 362),
supplied without lamp
1 m
2 m
1 m
2 m
250
125
500
500
In the case of
luminaires for
discharge lamps,
the control gear is
in the wall box.
250
250
8937741
5500 lm
HIT-DE 70 W
2 m 4 m 6 m
500
8938746
14800 lm
HIT-DE 150 W
2 m 4 m 6 m
Lamps (see page 364 –365)
HIT-DE HIT-DE-CE
90
90
60
60
100
200
100
200
300
I (cd/klm)
60
60
90
I (cd/klm)
90