Exterior Lighting 2012/2013 - Fergin AB

Nightvision
Wall washer
For ceramic metal halide lamps (HIT-DE-CE) and
high pressure sodium lamps (HST-DE)
protection class I, IP65 , IK07
die cast aluminium housing, polyester powder
coated, high gloss aluminium reflector, all exterior
steel parts stainless steel, tempered safety glass,
silicon gasket, closure by 4 stainless steel screws,
mounting flange with tilt scale, 2 drilled holes
Ø 8.5 mm, spacing 442 mm, tilt range 110°,
M20 cable gland, integral ballast and ignitor,
HPF available (see page 362), supplied without lamp
90
90
90
200
300
400
200
300
400
200
300
400
I (cd/klm)
90
I (cd/klm)
90
I (cd/klm)
90
Lamps (see page 364 –365)
HIT-DE-CE HST-DE
Nightvision 35 W, wall washer
Part number Colour Lamp Lampholder Weight Half beam angle γ
8 746 041 009 black HIT-DE-CE 35 W
8 746 061 009 white General Electric
8 746 051 009 silver grey
C 0 – 180 C 90 – 270
Rx7s 3.9 kg 10° 102°
Nightvision 70 W, wall washer
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 740 041 009 black HIT-DE-CE 70 W Rx7s 4.2 kg 10° 102°
8 740 061 009 white HST-DE 70 W
8 740 051 009 silver grey
Nightvision 150 W, wall washer
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 – 180 C 90 – 270
8 743 041 009 black HIT-DE-CE 150 W Rx7s 4.9 kg 10° 102°
8 743 061 009 white HST-DE 150 W
8 743 051 009 silver grey
Accessories for Nightvision, wall washer
Part number Colour Description
127 0 151 000 yellow Colour filter, internally fitted
127 0 153 000 blue (not suitable for use in 150 W fittings)
127 0 157 000 red
127 0 158 000 green
Nightvision 71
Nightvision 35/70/150 W