Exterior Lighting 2012/2013 - Fergin AB

Superlight 1000 W
Superlight 1000 W, asymmetrical, wide beam
Part number Colour Lamp Lampholder Weight Half beam angle γ
8 810 048 009 black HIT 1000 W E40 16.7 18°
8 811 048 009 HST 1000 W 20°
Superlight 1000 W, axially symmetrical, medium wide beam
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 —180 C 90 — 270
8 810 044 009 black HIT 1000 W E40 16.7 kg 29° 68°
8 811 044 009 HST 1000 W
138 Superlight
Superlight 1000 W
Asymmetrical, wide beam
For metal halide lamps (HIT) and
high pressure sodium lamps (HST)
protection class I, IP65
windage area AW 0.22 m 2
die cast aluminium housing, polyester powder
coated, asymmetrical high gloss aluminium reflector,
all exterior steel parts are stainless steel, tempered
safety glass, silicon gasket, closure with 4 stainless
steel screws, hinged front frame, mounting bracket
powder coated aluminium with tilt scale: 4 drilled
holes Ø 9.5 mm, spacing120 mm (200 mm),
2 holes Ø16.5 mm, spacing 300 mm, 1 centre
hole Ø 21mm, tilt range150°, M20 cable gland,
integral ignitor, separate ballast required
(see page 139), supplied without lamp
Lamps (see page 364 –365)
HIT HST
90
60
90
60
150
300
500
750
I (cd/klm)
90
60
Superlight 1000 W
Axially symmetrical, medium wide beam
For metal halide lamps (HIT) and
high pressure sodium lamps (HST)
protection class I, IP65
windage area AW 0.22 m 2
die cast aluminium housing, polyester powder coated,
axially symmetrical aluminium reflector (high gloss or satin
finish), all exterior steel parts are stainless steel, tempered
safety glass, silicon gasket, closure with 4 stainless steel
screws, hinged front frame, mounting bracket powder
coated aluminium with tilt scale: 4 drilled holes
Ø 9.5 mm, spacing 120 mm (200 mm), 2 holes
Ø 16.5 mm, spacing 300 mm, for 1 centre hole
Ø 21 mm, tilt range 150°, M20 cable gland, integral
ignitor, separate ballast required (see page 139),
supplied without lamp
I (cd/klm)
90
60