Exterior Lighting 2012/2013 - Fergin AB

Ground-recessed uplighters
Ground-recessed uplighters, adjustable optics, rotationally symmetrical narrow beam
Part number Lamp Lampholder Temperature* Tilt range Half beam angle γ
8 600 011 009 HIT-TC-CE 35 W G8.5 74° C 0 – 25° 10°
* With the heat-block filter (see accessories) the surface temperature of the glass is reduced to 69° C.
Ground-recessed uplighters, adjustable optics, rotationally symmetrical medium wide beam
Part number Lamp Lampholder Temperature* Tilt range Half beam angle γ
8 600 012 009 HIT-TC-CE 35 W G8.5 70° C 0 – 25° 23°
* With the heat-block filter (see accessories) the surface temperature of the glass is reduced to 65° C.
Part number Description
. . . . 1 . . 009 Luminaire with slip-resistant glass (The light distribution becomes more diffused.)
Part number Description
. . . . . . . 069 Luminaire for installation flush with surrounding surface
(in combination with installation sleeve 126 0 160 060)
Accessories for ground-recessed uplighters/adjustable optics, HIT
Part number Colour Description
126 0 121 000 yellow Colour filters
126 0 123 000 blue
126 0 127 000 red
126 0 128 000 green
Part number Description
126 0 124 000 Heat-block filter, reduces the surface temperature on the glass
126 0 122 000 Ribbed glass, for linear beam control, continuously adjustable through 360°
126 0 212 000 Prismatic glass, for diffused light distribution
Part number Description
126 0 120 940 Radial louvre, to reduce lateral glare, internally fitted
Part number Description
226 0 161 000 Cast-resin connection box, for single connection to luminaire or for through wiring with
buried cable. For luminaires supplied with cable and installation sleeve (recess box).
254
Ground-recessed uplighters
Ground-recessed uplighters
Rotationally symmetrical,
adjustable optics
For ceramic metal halide lamps (HIT-TC-CE)
protection class I, IP67 , IK10
cast aluminium housing, double powder coated,
rotationally symmetrical aluminium reflector, tilt range
0-25°, all exterior steel parts are stainless steel,
tempered safety glass flush with frame, for loads up
to max. 5000 kg (according to DIN IEC
60598-2-13), silicon gasket, stainless steel cover
ring, closure with 6 stainless steel screws,
M20 cable gland with 0.8 M cable
H07RN-F3G1.5, stainless steel cable gland, facility
for through wiring, integral LPF ballast and ignitor,
HPF available on request (see page 362), supplied
without lamp
5 m
3 m
5 m
3 m
16
16 125
32
32
64
32
16
16
64 32
16
16
16 125
32
64
HIT-TC-CE 35 W
16 64
3200 lm
6000
8600011 4000
32
4 m 8 m 12 m
16
32
HIT-TC-CE 35 W
16
3200 lm
64 32
Lamps (see page 364 –365)
HIT-TC-CE
16
16
8600012
4 m 8 m 12 m
105
75
1600
1200
800
25°
25°
I (cd/klm)
135
135
105
75
105
75
I (cd/klm)