Exterior Lighting 2012/2013 - Fergin AB

Nightline B
with wall arm and 2 joints
For metal halide lamps (HIT-DE) and
ceramic metal halide lamps (HIT-DE-CE)
protection class I, IP65
die cast aluminium housing, polyester powder
coated, axially symmetrical high gloss aluminium
reflector, all exterior steel parts are stainless steel,
tempered prismatic safety glass, silicon gasket,
closure with 4 stainless steel screws, wall box:
4 drilled holes Ø 10 mm, spacing 74 x 145 mm,
cable entry Ø 7–10 mm, recessed or surface
mounted cable, knuckle joint with tilt range 180°,
wall arm with tilt range 140°, LPF ballast and ignitor
or electronic ballast in wall box, HPF available
on request (see page 362), supplied without lamp
90
90
60
60
100
200
100
200
300
I (cd/klm)
60
90
I (cd/klm)
60
90
1 m
2 m
1 m
2 m
250
125
500
Lamps (see page 364 –365)
HIT-DE HIT-DE-CE
500
500
250
500
250
8937742
5500 lm
HIT-DE 70 W
2 m 4 m 6 m
500
8938747
14800 lm
HIT-DE-CE 150 W
2 m 4 m 6 m
Nightline B with wall arm and 2 joints, HIT-DE/HIT-DE-CE
Part number* Colour Lamp Lampholder Weight Half beam angle γ
8 937 742 009 black HIT-DE 70 W
8 937 762 009 white HIT-DE-CE 70 W
8 937 752 009 silver grey
*Can also be supplied with electronic ballast upon request.
C 0 –180 C 90 – 270
Rx7s 6.7 kg 93° 79°
Nightline B with wall arm and 2 joints, HIT-DE/HIT-DE-CE with electronic ballast
Part number Colour Lamp Lampholder Weight Half beam angle γ
C 0 –180 C 90 – 270
8 938 747 009 black HIT-DE 150 W Rx7s 5.9 kg 91° 81°
8 938 767 009 white HIT-DE-CE 150 W
8 938 757 009 silver grey
Nightline B with wall arm 319
Nightline B with wall arm