Exterior Lighting 2012/2013 - Fergin AB

Fluxa BGU Uplight
For metal halide lamps (HIT-DE),
high pressure sodium lamps (HST-DE)
protection class I, IP54
windage area AW 0.17 m 2
cast aluminium housing, polyester powder coated,
asymmetrical high gloss aluminium reflector, all
exterior steel parts are stainless steel, tempered
safety glass, silicon gasket, closure with 2 stainless
steel screws, hinged front frame, adjustable bracket
assembly: 2 drilled holes Ø 8.5 mm, spacing
64 mm, 2 drilled holes Ø 8.5 mm, spacing
56 mm, tilt range 30°, cable gland M20, integral
LPF ballast and ignitor, HPF available on request
(see page 362), supplied without lamp
105
75
135
600
400
I (cd/klm)
105
75
Lamps (see page 364 –365)
HIT HST
Calculation example for indirect
lighting using 3 nos. Fluxa
BGU 250 W:
Ceiling height: 5 m
Luminaire installation height: 3 m
Ceiling reflectance value: 80%
Average illuminance at floor level: 60 lx.
Uniformity: 0.53
Fluxa BGU Uplight 250 W, HIT-DE
Part number Colour Lamp Lampholder Weight Main beam angle γ
8 275 240 009 black HIT-DE 250 W Fc2 14.0 kg 45°
8 275 250 009 silver grey
Fluxa BGU Uplight 250 W, HST-DE
Part number Colour Lamp Lampholder Weight Main beam angle γ
8 276 240 009 black HST-DE 250 W Fc2 14.0 kg 45°
8 276 250 009 silver grey
Accessories only for Fluxa BGU Uplight
Part number Description
232 0 116 000 Glare shield,
adjustable 45 mm, to prevent glare from light reflected backwards
Fluxa BGU Uplight 233
Fluxa BGU Uplight