Expansion modules - Automatech

Products
Expansion modules
PNOZ mc5.1p
Function description
The data to be transferred via INTER-
BUS FO is selected and configured in
the PNOZmulti Configurator. The base
Wiring
The wiring is defined in the circuit diagram
of the PNOZmulti Configurator.
It is possible to define which inputs
and outputs on the safety system will
communicate with INTERBUS FO. The
PNOZ mc5.1p features RX and TX F-
SMA screw connections for IBS IN and
RX and TX for IBS OUT for connecting
to the INTERBUS FO.
unit and the PNOZ mc5.1p are connected
via a jumper. The PNOZ
mc5.1p is also supplied with voltage
via this jumper. After the supply voltage
is switched on or the PNOZmulti
safety system is reset, the PNOZ
mc5.1p is configured and started automatically.
2.3
Key:
IBS IN: Remote bus IN
IBS OUT: Remote bus
OUT
TX: Transmitter
RX: Receiver
Please note:
Information given in the “Technical details”
must be followed.
2.3-94
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
NSG-D-2-384-2006-02