Expansion modules - Automatech
Expansion modules - Automatech
Expansion modules - Automatech
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Products<br />
<strong>Expansion</strong> <strong>modules</strong><br />
PNOZ mc9p<br />
2.3 NSG-D-2-402-2006-11<br />
Products <strong>Expansion</strong> PNOZ mc9p <strong>modules</strong><br />
<strong>Expansion</strong> module for connection to a<br />
base unit from the PNOZmulti modular<br />
safety system<br />
Approvals<br />
PNOZ mc9p<br />
<br />
Unit features<br />
Can be configured in the PNOZmulti<br />
Configurator<br />
Connection for PROFINET IO<br />
Transmission rate 100 MBit/s<br />
(100BaseTX)<br />
Status indicators for communication<br />
and for errors<br />
Max. 1 PNOZ mc9p can be connected<br />
to the base unit<br />
A maximum of 24 inputs and 24<br />
outputs on the PNOZmulti safety<br />
system can be defined in the<br />
PNOZmulti Configurator for communication<br />
with PROFINET IO.<br />
Unit description<br />
The expansion module may only be<br />
connected to a base unit from the<br />
PNOZmulti modular safety system.<br />
It connects the PNOZmulti modular<br />
safety system to PROFINET IO.<br />
The PNOZmulti modular safety system<br />
is used for the safety-related interruption<br />
of safety circuits.<br />
The unit is designed for use in:<br />
Emergency stop equipment<br />
Safety circuits in accordance with<br />
VDE 0113 Part 1 and EN 60204-1<br />
The PNOZ mc9p expansion module is<br />
used for communication between the<br />
PNOZmulti modular safety system and<br />
PROFINET IO.<br />
PROFINET IO is designed for fast data<br />
exchange at field level. The PNOZ<br />
mc9p expansion module is a passive<br />
PROFINET IO subscriber. The basic<br />
communication functions with<br />
PROFINET IO conform to the System<br />
Description published by the PROFI-<br />
BUS User Group. The central controller<br />
(master) reads input information<br />
from the slaves and writes output information<br />
to the slaves as part of each<br />
cycle.<br />
The expansion module may not be<br />
used for safety-related functions.<br />
System requirements<br />
PNOZmulti Configurator: From Version<br />
5.0.0<br />
Base unit PNOZ m0p: From Version<br />
2.2<br />
Base unit PNOZ m1p: From Version<br />
5.2<br />
Base unit PNOZ m2p: From Version<br />
2.2<br />
2.3<br />
Block diagram<br />
PROFINET<br />
Base unit<br />
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany<br />
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de<br />
NSG-D-2-402-2006-11<br />
2.3-113
Change language