Expansion modules - Automatech

Products
Adapter for PNOZ ms1p and PNOZ ms2p
PNOZ msi6p
2.4 NSG-D-2-389-2008-08
Products Adapter PNOZ msi6p for PNOZ ms1p and PNOZ ms2p
Description
The connection cable is used to connect
an incremental encoder to the
PNOZ ms2p speed monitor.
The contacts on connectors X1 and X2
are connected and have the same assignment.
The signals that are relevant
for the speed monitor are recorded in
parallel and are fed to the RJ-45 connector
via the cable. These signals use
the following pins on connectors X1
and X2:
Signal
Pin No.
A
2
/A
1
B
4
/B
3
Vcc
nc
GND 9
L
B
2.4
X1
X3
T
X2
Technical details
Environmental data
Connector X1
Male 9-pin D-Sub connector
Connector X2
Female 9-pin D-Sub connector
Connector X3
RJ-45 connector
Fixing screws
M3
Ambient temperature 0 ... +60 °C
Storage temperature -25 ... +70 °C
Protection type
IP51
Dimensions W/D
31.5 mm/40.0 mm
Cable runs L 7500 mm Order no.: 773859
2500 mm Order no.: 773860
1500 mm Order no.: 773861
Weight 325 g Order no.: 773859
125 g Order no.: 773860
95 g Order no.: 773861
2.4-4
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
NSG-D-2-389-2008-08