1917 Cadillac - GM Heritage Center

26 PARTS LIST FOR TYPES 51-53-55-57 ENGINE
Code Word Sec-Bin Serial Part Name Type Symbol Price
BAHIG 12-E-15 A-927 Plunger with rod for accelerator chamber 51-3-5-7 22255 $1.00
CAHIG 17-D-52 A-928 Cork stopper for plunger well. 51-3-5-7 32213 .10
DAHIG 10-U-9 A-929 Cover plate for plunger on accelerator chamber 51-3-5-7 19876 .05
FAHIG 10-U-ll A-930 Packing washer between cover plate and chamber 51-3-5-7 11467 .15
KAHIG 12-D-31 A-931 Cap for plunger on accelerator chamber 51-3-5-7 19875 .15
LAHIG 10-Q-15 A-932 Adjusting clamp for plunger 51-3-5-7 31222 .35
MAHIG 9-P-15 A-933 Screw for plunger adjusting clamp 51-3-5-7 11828 .05
PAHIG 12-D-24 A-934 Pin for plunger clamp and accelerator lever 51-3-5-7 16221 .05
RAHIG 10-B-16 A-935 Cotter pin 51-3-5-7 15251 .05
SAHIG 12-B-77 A-936 Auxiliary air valve : 51-3-5-7 19391 1.00
TAHIG 12-B-ll A-937 Spring for auxiliary air valve 51-3-5-7 19828 .10
ZAHIG 10-1-3 A-938 Pin for auxiliary air valve 51-3-5-7 16220 .05
BEHIG 10-B-16 A-939 Cotter pin 51-3-5-7 15251 .05
CEHIG 12-D-39 A-940 Adjusting screw for auxiliary air valve 51-3-5-7 20412 .45
DEHIG 10-M-l A-941 Plunger for adjusting screw 51-3-5-7 12265 .05
FEHIG 10-Q-3 A-942 Spring for plunger 51-3-5-7 12266 .05
KEHIG 14-C-5 A-943 Lever arm for auxiliary air valve 51-3-5-7 16404 .30
LEHIG 13-C-l A-944 Spring for lever arm 51-3-5-7 16410 .05
MEHIG 10-U-9 A-945 Cover for lever arm slot 51-3-5-7 16405 .05
PEHIG 9-K-14 A-946 Screw attaching cover 51-3-5-7 11829 .05
REHIG 12-B-17 A-947 Cover plate complete for air valve 51-3-5-7 20475 .30
SEHIG 12-B-45 A-948 Cover plate only for auxiliary air valve 51-3-5-7 19854 .15
TEHIG 16-B-112 A-949 Cork stop for auxiliary air valve 51-3-5-7 19933 .10
ZEHIG 10-1-8 A-950 Rivet for stop 51-3-5-7 17688 .05
BIHIG 10-J-12 A-951 Washer for rivet 51-3-5-7 11472 .05
CIHIG 9-K-14 A-952 Screw attaching cover '. 51-3-5-7 11829 .05
DIHIG 12-C-46 A-953 Shield for auxiliary air inlet 51-3-5-7 31288 .30
FIHIG 9-K-14 A-954 Screw attaching shield 51-3-5-7 11829 .05
KIHIG 13-B-24 A-955 Screw, carburetor to intake manifold 51-3-5-7 11643 .10
CARBURETOR DRAIN
MIHIG 12-D-17 A-959 Drain pocket for carburetor 51 34420 2.00
PIHIG 12-D-6 A-960 Drain pocket for carburetor 53-5-7 34176 1.75
RIHIG 12-D-38 A-961 Shelf with pin for drain pocket 51 41519 .85
SIHIG A-962 Support pin for drain pocket 51 34415 .05
TIHIG 10-J-7 A-963 Support lor drain pocket 53-5-7 34175 .30
ZIHIG 9-C-10 A-964 Screw, shelf to generator 51 11953 .05
BOHIG 10-J-7 A-965 Clamp screw, drain pocket on support stud 51-3-5-7 11644 .05
COHIG 15-B-45 A-966 Lock washer 51-3-5-7 11314 .05
DOHIG 10-E-10 A-967 Lock washer under support stud 53-5-7 11325 .05
FOHIG 9-N-4 A-968 Taper pin for support pin 51 15002 .05
KOHIG 24-D-7S A-969 Front drain pipe with nut and clip 51 41479 1.15
LOHIG 24-C-153 A-970 Rear drain pipe with nut and clip 51 41475 1.00
MOHIG 24-C-103 A-971 Front drain pipe with nut and clip 53-5-7 22765 1.00
POHIG 24-C-153 A-972 Rear drain pipe with nut and clip 53 41475 1.00
ROHIG 24-D-69 A-973 Rear drain pipe with nut and clip 55-7 22766 1.15
SOHIG 14-C-55 A-974 Nut for drain pipe connection 51-3-5-7 11687 .20
TOHIG 10-R-9 A-975 Clip for front drain pipe 51-3-5-7 34182 .05
ACCELERATOR PEDALS
NOTE—Two types of accelerator pedal brackets and
cover plates for generator were used on type 53 cars.
The second type accelerator pedal may be distinguished
from the first, in that the bracket supporting
the accelerator pedal is integral with the hand hole
cover on the transmission
_
The second type was used on all cars after engine A-26482
ZUHIG 18-B-ll A-979 Accelerator foot pedal 51 19764 1.25