FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet
FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet
FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
María Molina Martín<br />
ENERGY STUDY<br />
According to the regulations: BBR, Section 9 Energy management: Buildings<br />
shall be designed so that the specific energy consumption of the building does<br />
not exceed:<br />
- 110 kWh per m2 of floor area (A temp) per year in the Southern climate zone.<br />
- 130 kWh per m2 of floor area (A temp) per year in the Northern climate zone.<br />
In our case, the building is located in Halmstad, southern Sweden, therefore the<br />
energy consumption shall not exceed 110 kWh/m2.<br />
The Specific Energy is calculated using the following formula:<br />
Energy consumption of the building (kW·h/year)<br />
Floor area Atemp (m2)<br />
In order to calculate the energy consumption of the building it is necessary to<br />
know the areas and U-values of the enclosing parts of the building in contact<br />
with heated indoor air. These parts are:<br />
- Ground floor<br />
- Roof<br />
- Exterior walls (facades)<br />
- Windows<br />
- Exterior doors<br />
U-value of the facades can be found in the catalog ISOVER, but we have<br />
calculated, as with the other parts of the building.<br />
First we calculate the U value of the facade, and we need some data in the<br />
table below: Rse and Rsi are the thermal resistances in the indoor and outdoor<br />
surfaces, respectively, taken from the table below, according to the position of<br />
the element which is being calculated, heat flow direction and its location in the<br />
building.<br />
24