FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet
FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet
FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
María Molina Martín<br />
- They will be formed by a horizontal platform of 60 cm. of minimum width<br />
formed by three boards of 20 width cm, placed on two supports in form of<br />
invested "V".<br />
- The minimum thickness of the planks which form the platform will be of 50 mm<br />
- The planks that form the platform will stand out of their support in the<br />
borriqueta 20 cm maximum<br />
- When the work platforms are at more than 2 meters high or they facilitate an<br />
external fall of more than 2 meters, they will be protected in all their contour with<br />
handrails, they will be of 90 cm of minimum height, they will have handrails,<br />
intermediate list and baseboard<br />
- The handrails of they will have a minimum resistance of set of 150 Kg/m<br />
- The platforms won't be overloaded, maintaining on it only the strictly<br />
necessary material for the continuity of the works and distributed evenly on the<br />
same one<br />
- It will be forbidden to add strange elements to increase their height of the work<br />
platform, as well as the placement of borriquetas scaffolds of leaning in other<br />
borriquetas scaffold<br />
- The support of the work platform will be carried out on the described supports,<br />
and never using blocks, drums, etc.<br />
- Borriquetas scaffolds won't be used mounted total or partially on hung<br />
scaffolds<br />
- The borriquetas will always be mounted perfectly to avoid the risks to work on<br />
inclined surfaces<br />
- The metallic borriquetas of system of closing opening or scissor, they will be<br />
endowed with chain constrainer of the maximum, such opening that they<br />
guarantee their perfect stability<br />
- The metallic borriquetas to sustain work platforms, located at two or more<br />
meters high will be braced to each other, by means of crossings of San<br />
Andres", to avoid the oscillatory movements that make the insecure scaffold<br />
- The wood to use will be healthy, without defects neither knots visible, to avoid<br />
the risks for break of the planks that form a work surface<br />
Personal protection<br />
If exists expressed approval of the Ministry of Work and Social Security, the<br />
garments of personal protection to use in this work, they will be homologated.<br />
Besides the obligatory protection garments to carry out the task specifies on the<br />
scaffolds on borriquetas, they must use you:<br />
- Polyethylene helmet. Class N<br />
- Nonskid footwear<br />
TUBULAR METALLIC SCAFFOLDS<br />
Detection of the most frequent risks<br />
- Landslide of the scaffold due to being not well seated<br />
49