FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet

María Molina Martín
- The security belts won't be used if they have deformed rings, or break points
are appreciated
- The embedded conductors will be located in horizontal or vertical address,
avoiding crossing the walls in diagonal
- The work place will be often ordered and cleaned in the phase of opening
work and closing of holes for facilities, to avoid the risks of footfalls or stumbles
- The illumination of the cuts won't be inferior to 100 lux measured to 2 meters
of the floor
- The illumination by means of portable ones will be made using tight lamp
boxes with insulating handle fed to 24 volts
- Use of the pegs male-female
- The use of hand stairways or of scaffolds in places with fall risk from height It
will be forbidden in work, installing the appropriate protection of security
- The tools to use will be protected with normalized insulating material
If a fire was originated in an installation in tension, they will come in the
following way:
- The sources in tension will be disconnected
- Extinguishers that have the indication of not using in presence of electric
current won't be used
- Insulating gloves will be used to hold the extinguisher
- The extinguisher will be at a minimum distance of 0.50 meters of the fire
during its use in facilities of low tension.
Personal protection
- Security helmet
- Insulating boots for electricity (in connection works)
- Security boots (in wired)
- Insulating gloves
- Work clothes
- Security belt
- Maneuver bench
- Insulating carpet for works in tension
- Checkers of tension
- Belt tools appropriate
45