27.12.2013 Views

FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet

FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet

FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

María Molina Martín<br />

- The materials will be distributed evenly on the work platforms, in prevention of<br />

accidents for unnecessary overload<br />

- It will be forbidden in this work to work on platforms located in levels below<br />

other platforms in those that one is working, in prevention of accidents for fallen<br />

of objects<br />

- Anybody won't jump or run on the scaffolds<br />

- The scaffolds will be free of brashes<br />

- Any class of materials won't be thrown from the scaffolds<br />

- In the disassembly they won't allow to fall charts, railway ties or any other<br />

element of the scaffold<br />

- The minimum thickness of the planks which form the platform will be of 50 mm<br />

- When the work platforms are to more than 2 meters high or facilitate an<br />

external fall of more than 2 meters, they will be protected in all their contour with<br />

handrails, they will be of 90 cm of minimum height, they will have handrails,<br />

intermediate list and baseboard<br />

- The handrails will have a minimum resistance of group of 150 Kg/m<br />

- The wood to use will be healthy, without defects neither knots visible, to avoid<br />

the risks for break of the planks that form a work surface<br />

Personal protection<br />

If exists expressed approval of the Ministry of Work and Social Security, the<br />

garments of personal protection to use in this work will be homologated.<br />

Besides the obligatory personal protection garments to carry out the task<br />

specifies on a scaffold they must use<br />

- Polyethylene helmet. Class N<br />

- Security boots. Class III. Degree B<br />

- Nonskid footwear<br />

- Security belt. Class C. Type 2<br />

- Work clothes<br />

SCAFFOLDS ON BORRIQUETAS<br />

Detection of the most frequent risks<br />

- Fallen of the planks that form the platform, for excessive flight from the support<br />

in the borriquetas.<br />

- Overturns for anchorage lack or of bracements<br />

- Fallen of personal to different and at the same level<br />

- Blows or splash during the assembly operations or disassembly<br />

- Those derived of the use of planks and wood of small section or in not well<br />

state (breaks, shortcomings, swayings)<br />

Basic norms of security<br />

- A third part of the planks which form the floor of the platform, will be held to the<br />

borriquetas bundling of ropes<br />

- The maximum separation among borriquetas will be of 2.50m, in the event of<br />

being armed it will be of 3.50 m<br />

48

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!