FINAL PROJECT: HOSTEL HALMSTAD-SWEDEN - RiuNet

María Molina Martín
- Forbidden to journey itself being above directly on the curved parts of the stern
(ceramics or concrete), fall prevention at different level.
Permanent facilities:
Description and organization of the works
The permanent facilities can be subdivided in:
- Mechanical: elevators, electricity, plumbing, gas and special facilities
- Term mechanics: heating, air conditioning, ventilation.
The trust factor increases the number of accidents.
Detection of the most frequent risks
- Fall of personal to the same and different level
- Fallen of objects
- Cut for handling of manual tools
- Cut for handling of the guides and drivers
- Cut for the handling of foils
- Cut for the managing tools with edge
- Cut for the use of the glass fiber
- Risks that are detected during the connection tests and setting in-service of
the installation. Being the most common:
-Electrocution or burns, for the bad protection of electric boxes, for incorrect
maneuvers in the lines, for use of tools without isolation, for bridge of the
protection mechanisms, for direct connections without pegs male-female.
- Trappings among heavy pieces
- The inherent ones to the use of the autogenous, electric welding, oxyacetylene
and oxicut
- Footfalls on sharp objects
- Burns
- Over efforts
- Direct and indirect electric contacts
- Explosion of the torch or of the deposit of liquefied gas
- Trappings between engagements and transmissions, during the setting
operations to point or assembly
- The inherent accidents to the auxiliary equipment to use
- Dermatosis for contacts with fibers
Personal protection
- Polyethylene helmet, during the displacements for the work and in places with
risk of fall of objects or of blows
- Insulating boots for electricity (in connecting works)
- Security boots (in wired)
- Insulating gloves
43