Data elements & code sets directory - GS1

EANCOM® 2002 Part III Data Element & Code Sets Directory
6311 Measurement purpose code qualifier
LL
LMT
MV
PD
RL
SH
SO
SV
TL
TR
Code qualifying the purpose of the measurement.
= Lift limitation
A measurement indicating lift capacity limitations.
= Loading metre
The length in a vehicle, whereby the complete width and height
over that length is needed for the goods.
= Measured value (GS1 Code)
Specification of a value which was measured for test purposes.
= Physical dimensions (product ordered)
Specified measurement dimensions refer to physical dimensions
of a product, material or package.
GS1 Description:
The restriction 'product ordered' can be ignored.
= Receiving facility limitations
Specified measurement dimensions are provided as a result of
limitations or restrictions related to the physical dimensions of a
product, material or package at the reception point.
= Shipping tolerance
Tolerances related to shipping.
= Storage limitation
A measurement indicating limitation in relation to storage.
= Specification value
A measurable item characteristic specified by the buyer, seller or
third party.
= Transportation equipment limitations
A measurement indicating limitations in relation to transportation
equipment.
= Test result
Indicates that the data to follow is the test result measurements.
+ UTV = Unit total volume of pure alcohol (GS1 Code)
VO
VT
The measurement of the unit total volume of pure alcohol.
= Observed value (GS1 Code)
The reported test result which includes measurement variability.
= True value (GS1 Code)
The reported test result with the measurement variability
removed.
@ X4E = Retail container dimension (GS1 Code)
@ X5E = Colour (GS1 Code)
Single physical dimension of a retail container.
The colour of an object.
@ X6E = Size (GS1 Code)
Dimensions or magnitude of an object.
++ Y1E = Internal dimensions (GS1 Code)
Internal dimension of an article, e.g. a piece of furniture
S
Old Code
AAB
ABB
ABC
© Copyright GS1 - 249 - Edition 2012