Data elements & code sets directory - GS1

EANCOM® 2002 Part III Data Element & Code Sets Directory
0029 Processing priority code
Code determined by the sender requesting processing priority for the interchange.
Notes:
1. Used if specified in IA.
A
= Highest priority
Requested processing priority is the highest.
S
Old Code
0031 Acknowledgement request
Code determined by the sender for acknowledgement of the interchange.
Notes:
1. Set = 1 if sender requests acknowledgement, i.e. UNB and UNZ segments
received and identified.
1 = Requested
Acknowledgement is requested.
S
Old Code
0032 Communications agreement ID
0035 Test indicator
Identification by name or code of the type of agreement under which the
interchange takes place.
Notes:
1. If used, to identify type of communication agreement controlling the interchange,
e.g. Customs or ECE agreement. Code or name as specified in IA.
Indication that the interchange is a test.
Notes:
1. Set = 1 if the interchange is a test. Otherwise not used.
1 = Interchange is a test
Indicates that the interchange is a test.
4+ 5 = Interchange is a service provider test
Indicates that this interchange is a test with a service provider.
S
Old Code
0036 Interchange control count
The count either of the number of messages or, if used, of the number of functional
groups in an interchange. One of these counts shall appear.
0038 Functional group identification
0040 Sender identification
Identification of the one type of message in a functional group.
Code or name identifying the division, department etc. within the originating
sender's organization.
0044 Recipient's identification
Code or name identifying the division, department etc. within the recipient's
organization for which the group of messages is intended.
© Copyright GS1 - 27 - Edition 2012