Frequency converter FKO - Brinkmann Pumps

Parameters
3.069 PID pesent mode Unit: integer
Relationship to
parameter:
1,100
3,062 to 3,068
Parameter manual:
p. xy
Transfer status:
50 Operating manual FKO
2
min: 0 own value (to
be entered!)
max.: 2
def.: 0
Selection of the digital inputs used for fixed frequencies
0 = Digital In 1 (PID present reference 1) (3,062)
1 = Digital In 1, 2 (PID present references 1 – 3) (3,062 to 3,064)
2 = Digital In 1, 2, 3 (PID present references 1 – 7) (3,062 to
3,068)
3.070 PID stand-by time Unit: s
Relationship to
parameter:
1,020
Parameter manual:
S. xy
Transfer status:
2
min: 0 own value (to
be entered!)
max.: 10000
def.: 0
If the drive control operates the set time with the low speed (parameter
1,020), the motor is stopped (0 Hz), see also Chapter 5.2.1, “PID process
control”
0 = disable
> 0 = waiting time until stand-by function is enabled
3.071 PID stand-by hysteresis Unit: %
Relationship to
parameter:
3,060
Parameter manual:
p. xy
Transfer status:
2
min: 0 own value (to
be entered!)
max.: 50
def.: 0
Condition for waking up the PID controller from stand-by.
Once the control difference exceeds the set value in %, the control begins
again, see also “Control mode (parameter 1,100) – PID controller”.