Palm-I Unit Model 969-9892 - Agilent Technologies

18
Technical Information
Use
and finally the pump status (for example):
P U M P R E A D Y : U S E
R E M O T E S T A R T
Monitor Mode
By pressing the TEMPERATURE-POWER-SPEED push-button, the
display shows:
P = X X X W T = X X ° C
I = X : X A X X X X H z
where
• P = is the power supplied by the controller to the pump (0 to 999
watt)
• T = is the temperature of the outer ring of the upper bearing
(range 00 to 99 °C)
• I = current
• HHH = Indicates the measurement unit set for the threshold (Hz,
mA, sec. W)
• XXXXHz = is the excitation frequency in hertz
1 Press another time to exit from this menu.
2 Press the CYCLE NUMBER once and the display shows:
X X X X C Y C L E X X X X X m
P U M P L I F E X X X X X h
Where:
• XXXXCYCLE = are the numbers of cycles performed (range 0 to
9999)
• XXXXXm = is the elapsed time related to the last cycle (range 0
to 99999 minutes)
• PUMP LIFE XXXXXh = is the total operation time of the pump
(range 0 to 99999 hours).
118/138 PALM-I UNIT User Manual / 87-900-950-01 (E)