Palm-I Unit Model 969-9892 - Agilent Technologies

18
Technical Information
Use
• Selection: X is the special character that indicates if the set point
output has to be active when the set point has got through going
up (/) or going down (\).
Pressing the TEMPERATURE push button will display:
T H R E S H O L D S . P .
X X %
where:
• XX is the hysteresys of set point expressed in percentage.
Pressing the TEMPERATURE push button will display:
A I R / W A T E R C O O L .
S E L E C T I O N : X X X X X
where:
• Selection: XXXXX indicates the kind of cooling the pump is using
(air/water).
Pressing the TEMPERATURE push button will display:
A C T I V E S T O P
S E L E C T I O N : X X X
where:
• Selection: XXX is the selection for the active stop (yes or no).
Pressing the TEMPERATURE push button will display:
B A U D R A T E
X X X X B A U D
where:
• Selection: XXXX Baud selects the baud rate for serial
communication between PALM-I and controller (600, 1200, 2400,
4800 and 9600).
122/138 PALM-I UNIT User Manual / 87-900-950-01 (E)