Part - Studio Lights

VOLUME CONTROLS AND SELECTOR SWITCHES
for surface mounting
Control-program combination
Surface mount socket EG-200
Description
This new LPW presents the combination of a volume control
and a program selector switch. It’s possible to choose 5
channels and to individually adjust the volume. For technical
facts of the program selector switches and volume controls
please look on the left side.
The LPW-combinations are basically constructed with a 24V
emergency call relay which enables an emergency call even
when all controls or program selector switches are in 0-
position.
The LPW-combination is suitable to 2 x 55mm mount
sockets.
Description
These program selector switches are for the installation in
55mm flush mount sockets. In the case of surface
installation, please use the installation housing EG-100. You
can order the device also without coverage.
The program selector switch is made for the reception of up
to 5 different channels with one additional 0-position. It is
also equipped with an emergency call relay.
*
Program Selector Switch alpine white with relay . . . . . . PW-106 R
Program Selector Switch without coverage, with relay . PW-006 R
Rear and Front view of the Control-program combination
Mounting Case
L-Control (mono)
LRM-015 (15 W)
LRM-030 (30 W)
Control-Program-Combination, up to 6 W . . . . . LPW-106 R
alpine white with relay
Control-Program-Combination, up to 12 W . . . . . LPW-112 R
alpine white with relay
Control-Program-Combination, up to 24 W . . . . . LPW-124 R
alpine white with relay
Control-Program-Combination, up to 50 W . . . . . LPW-150 R
alpine white with relay
The surface mount socket EG-200 (plastic) is made for surface
installation of the control-program combination.
Surface Mount Socket (surface mounting, plastic) . . . . . . . . EG-200
Description
White, high-quality, impact
and scratch resistant plastic
for the installation of the
volume controls or program
selector switches.
Can be used as a surface
housing as well as a
protective case for flushmounting.
Height: 81 mm
Width: 80 mm
Depth: 45 mm
Mounting Case . . EG-101
Description
These mono-L-controls
are for setting the speaker
volume levels on low
impedance use.
They are especially suitable
for the mounting in cabinet
speakers etc.
LRM-015: 15 W, imp. 4 – 8 ohms (± 25 %)
Control range 0 – 40 dB, axis Ø 6
mm, cabinet Ø 41 x (H) 24 mm
LRM-030: 30 W, imp. 4 – 8 ohms (± 25 %)
Control range 0 – 40 dB, axis Ø 6
mm, cabinet Ø 50x50x28 mm.
L-Control, 15 W. . LRM-015
L-Control, 30 W. . LRM-030
150