Part - Studio Lights
Part - Studio Lights
Part - Studio Lights
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1-CHANNEL POWER AMPLIFIER WITH PILOT TONE<br />
Rear view<br />
IEC power inlet (cold condition)<br />
Remote switch-on via "Power Remote"<br />
24 V DC power supply terminal<br />
Groundlift switch<br />
Integrated pilot tone module FD-20 (optional)<br />
Speaker outputs, 25 V, 50 V and 100 V<br />
Input on screw-type connectors<br />
Switches for high-pass filter (400 Hz) and FD-20 module<br />
24 V (500 mA) output for switching external relays or similar units<br />
Balanced input for priority signal<br />
Volume control for priority signal<br />
Contact for priority enable<br />
Change-over contact for priority<br />
Technical data BA-120 DP BA-240 DP BA-480 DP<br />
Output power 120 W (RMS) 240 W (RMS) 480 W (RMS)<br />
Input sensitivity 0 dB (0.775 V), 66 kohms, balanced 0 dB (0.775 V), 66 kohms, balanced 0 dB (0.775 V), 66 kohms, balanced<br />
Output impedance 25 V, 50 V, 100 V 25 V, 50 V, 100 V 25 V, 50 V, 100 V<br />
Frequency response 35 - 20000 Hz (better than -3 dB) 35 ~ 20000 Hz (better than -3 dB) 35 ~ 20000 Hz (better than -3 dB)<br />
Signal-to-noise ratio better than 100 dB better than 100 dB better than 100 dB<br />
THD at 1 kHz better than 0.5% better than 0.5% better than 0.5 %<br />
Input filter 400 Hz /-3 dB 400 Hz /-3 dB 400 Hz /-3 dB<br />
Power consumption 328 W 735 W 1420 W<br />
Current consumption (230 V) 0.77 A at 1/8 power current draw 1.6 A at 1/8 power current draw 3.1 A at 1/8 power current draw<br />
1.77 A at rated power current draw 3.75 A at rated power current draw 7.4 A at rated power current draw<br />
AC power supply 230 V, 50 - 60 Hz 230 V, 50 - 60 Hz 230 V, 50 - 60 Hz<br />
DC power supply 24 V (emergency power supply) 24 V (emergency power supply) 24 V (emergency power supply)<br />
Dimensions (W x H x D in mm) 483 x 88 x 374; 2 RU 483 x 88 x 374; 2 RU 483 x 88 x 374; 2 RU<br />
Weight approx. 12.5 kg approx. 14.5 kg approx. 18.5 kg<br />
Description<br />
This pilot tone module serves to monitor the performance of<br />
amplifiers. It is installed in the slot provided on power<br />
amplifiers of the "DP" series. The generator produces a 20<br />
kHz test signal. Apart from the test of the power amplifier<br />
functioning, the speaker line is checked for short circuit<br />
faults.<br />
FD-20 Pilot Tone-Module<br />
Evaluation and switching to a backup amplifier is performed<br />
by the FS-381 amplifier switcher.<br />
Pilot Tone-Module for power amplifiers of the "DP" series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FD-20<br />
50