Part - Studio Lights

19˝ FOUR-TONE CHIME AND SIREN UNIT
Description
The CS-110 A four-tone chime and siren unit is used as an
alarm (siren) and signal (chime) module in central units of
audio systems. It can be controlled and activated simply
through the buttons on the front panel or by means of logic
controllers.
Please consider the following features:
● The pleasant and melodious chime can be played in fourtone,
three-tone or two-tone mode .
● The volume of the siren and the chime can be adjusted
separately on the front panel. The power switch has an
LED. The device has a balanced XLR output.
● The use of high-quality digital electronics makes the
device suitable for continuous operation as it is required
for audio systems.
● Chime and siren can be activated by means of remote
control. The device operates on mains power (230 V AC)
as well as on DC power (24 V DC), for example, in the
case of a power failure (emergency power supply).
● The alarm siren can sound a continuous tone, a manually
modulated siren tone or a high-low tone. It is equipped
with an automatic stop function, which means that it is
switched off after the respective time has elapsed
(continuous tone 1 minute, high-low 3 minutes).
Technical data
Chime frequencies
Siren frequencies
Audio output
Signal-to-noise ratio
Power consumption
Power supply
Remote control
Dimensions (W x H x D)
Weight
CS-110 A
440 Hz, 554 Hz, 655 Hz, 880 Hz
800 Hz
more than 0.245 V (-10 dBm), 600 ohms, bal. on XLR
better than 80 dB
3.5 W
AC: 120 V, 220 V, 230 V, 240 V (50 - 60 Hz), DC: 24 V
Potential free contacts
483 x 44 x 200 mm (19˝, 1 RU)
approx. 2.5 kg
IEC power inlet (cold condition)
Terminal for 24 V DC (emergency
power supply)
Rear view
Volume control for siren and
chime.
XLR signal output socket
Remote control for siren and
chime.
Four-tone chime and siren unit, (1 RU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CS-110 A
70