Part - Studio Lights

PEQ-2131VU / PEQ-2215VU
stage-sound
GRAPHIC-EQUALIZER
● DESCRIPTION
● The graphic equalizer PEQ-2215 VU has twice 15 bands
(stereo), the PEQ-2131 VU 31 bands (mono), each with a
range switch for ±6 dB or ±12 dB (cut/boost) and 60 mm
centrally catching faders.
● For every channel, there is one input level fader ±12 dB
with an output level VU meter in order to adjust altered
signals.
● The power supply takes place over an IEC power socket
on the rear side of the device. The power switch is on the
front side.
● Additionally, a ground/lift switch on the rear side helps
avoiding possibly occurring hum loops.
Figures show rear view of PEQ-2131 VU and PEQ-2215VU
● The stereo graphic equalizer PEQ-2215 VU further features
for every channel a switchable high-pass filter (40 Hz,
12 dB/oct.) as well as a low-pass filter (16 kHz, 12
dB/oct.).
● The mono graphic equalizer PEQ-2131 VU has a switchable
high- (from 10 Hz to 250 Hz) as well as a switchable
low-pass filter (from 3 kHz to 50 kHz).
● One clip LED per CH lights up, if the signal is 5 dB below
clipping.
● By a special “bypass” switch with LED display, the unaltered
input signal may be compared to the altered output
signal for any channel.
● The graphic equalizers, made in 19˝ design with 2 RU,
feature for every channel, as possibility for input and output
connection, a 6.3 mm jack socket, a XLR socket
(balanced) and a RCA socket (unbalanced).
● At the request of 24V DC operation (Please inquire).
Model designations
Graphic-Equalizer, (2 RU, 2 CH, 2 x 15-Band) . . . . . . . PEQ-2215 VU
Graphic-Equalizer, (2 RU, 1 CH, 31-Band) . . . . . . . . . . PEQ-2131 VU
Technical Data PEQ-2215 VU PEQ-2131 VU
Input sensitivity
0.775 V (0 dBm)
Input impedance
20 kohms, balanced; 15 kohms, unbalanced
Inputs XLR, jack 6.3 mm, RCA XLR, jack 6.3 mm, RCA
Output impedance < 600 ohms
Outputs
XLR, jack 6.3 mm, RCA
Bandwidth 2/3 oct 2 x 15 band 1/3 oct 1 x 31 band
Frequency response 20 Hz – 50 kHz @ -3 dB
THD
0.02% @ 1 kHz
Signal-to-noise ratio > 93 dB > 93 dB
High-pass filter 40 Hz 12 dB/octave 10 Hz - 250 Hz switchable
Low-pass filter 16 kHz 12 dB/octave 3 kHz - 50 kHz switchable
Range (band selection) ±6 dB or ±12 dB switchable per channel
Input power
15 W
Power supply
220V – 240V/AC, 50~60 Hz
Dimensions (W x H x D) 483 x 88.8 x 200 mm (2 RU)
Weight (net) 3.7 kg 3.6 kg
216