Part - Studio Lights

FANLESS 1-CHANNEL POWER AMPLIFIER
BAN-120
120 W
BAN-240
240 W
Fanless cooling !
Description
These 19˝ power amplifiers are ideal for the use in areas
which are sensitive to noise because they work with a
fanless cooling circuit. (Offices, Churches, Seminar rooms,
etc.).
They have been designed for continuous operation. They are
absolutely short circuit and open circuit proof and are
equipped with all relevant protection devices.
● The amplifiers have electronically balanced inputs on
screw-type connectors.
Possible hum pick-up from ground loops is avoided
through the balanced inputs and outputs.
● All models feature "SOFT START" and a special circuit
which suppresses unpleasant switch-on noise.
Please consider the following features:
*
● These amplifiers have two electronically balanced audio
inputs, of which one is suitable for programs and the
other (with priority) for announcements, etc.
● Optionally available are the Module FD-20 and FM-30.
They are monitor the amplifier basic functions.
● The high-pass filter (400 Hz), which can be activated on
the rear, reduces internal resonances and additionally
increases the sound quality.
● Relay contact (NO/NC) to switch 24V DC (500mA) i.e.
Emergency call relay
● The additional 100V slave input is used to insert the
signal directly from a 100V Line.
● The multicoloured LED indicators located on the front
panel continuously indicate the operating status of the
amplifier including protection functions and possible
dangers.
Model designations
Power Amplifier, (120 W sine, 3 RU). . . . . . . . . . . . . . . . . . . . . . BAN-120
Power Amplifier, (240 W sine, 3 RU). . . . . . . . . . . . . . . . . . . . . . BAN-240
41