Part - Studio Lights

19˝AUDIO DISTRIBUTION AMPLIFIER
Description
The AD-125 A audio distribution amplifier is, so to speak, the
central unit of the extremely flexible line level distribution
system. The system serves to route line signals from mixer
preamplifiers, sound source devices, etc. of up to 10 output
channels (power amplifier, with 1-channel operation) or 2 x 5
output channels (with 2-channel operation).
● Apart from the numerous features such as balanced
inputs and outputs, the audio distribution amplifier offers
excellent sound characteristics. It is also distinguished
by its extreme ease of installation and operation.
Please consider the following features:
Technical data
AD-125 A
● Each of the 10 outputs can be controlled separately. An
LED overmodulation indicator is provided for the two
input channels.
● The device is incorporated in a 19˝ housing with an
overall height of 1 RU.
Input impedance
Output impedance
Frequency response
Signal-to-noise ratio
THD
Crosstalk attenuation
Power supply
Power consumption
Dimensions (W x H x D)
Weight
0.775 V (0 dB), 15 kohms, balanced on XLR
0.775 V (0 dB), 600 ohms, balanced on XLR
better than -0.5 dB (20 Hz - 20 kHz)
better than 75 dB
less than 0.05 % (20 Hz - 20 kHz)
better than 108 dB
230 V AC (50/-60 Hz), 24 V DC
6.5 W
483 x 44 x 200 mm, (19˝, 1 RU)
approx. 2.9 kg
IEC power inlet (cold condition)
Terminal for 24 V DC (emergency
power supply)
XLR signal output sockets
XLR signal input sockets
Rear view
Connection example
Audio distribution amplifier, (1 RU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AD-125 A
71