JMA-2343/2344 - ProNav
JMA-2343/2344 - ProNav
JMA-2343/2344 - ProNav
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
※ The following should be used as the plug side connector for connecting to J3 and J4<br />
Connector Type JRC Code<br />
For J3 LTWD-06BFFA-L180 5JCAS00031<br />
For J4 LTWD-08BFFA-L180 5JCAS00027<br />
9.3.5 Connection of the external buzzer<br />
CAUTION<br />
Only qualified service personnel should perform external buzzer cabling work.<br />
Erroneous connection may cause breakdown or defective operation.<br />
The 5 pin connector side of the cable equipped with connector (7ZCRD0749) should be<br />
attached to EXT2 on the rear panel of display unit after removing the rubber stopper. The<br />
2 pin connector side should be connected to J5 of the display unit main control circuit<br />
(CMC-1156). The 3 pin connector need not be.<br />
Use the 5 pin connector (Type: LTWD-05BFFA-L180, JRC code: 5JCAS00030) for the plug<br />
side connector connected to EXT2.<br />
External connector J5 (5 pin)<br />
Attach after removing the rubber<br />
stopper.<br />
Main control circuit<br />
(CMC-1156)<br />
Power supply circuit<br />
(CBD-1596)<br />
J5 (2 pin)<br />
F1<br />
F2<br />
2 pin connector<br />
238
Change language