JMA-2343/2344 - ProNav

More documents

Recommendations

Info

Canceling center relocation (a) Push the soft key DISPLAY . (b) Push the soft key 2 and select first CENTER and then OFF CENT . Center relocation has been canceled. 3.3.23 Controlling power consumption of the radar In order to control power consumption, the timed transmission function is used. By using the timed transmission function, the system repeatedly alternates between transmission mode and standby mode. Setting the transmission time (a) Select "10", "20", or "30" in the line "TX PERIOD" - the menu "DISPLAY". The transmission time is designated by the rotation of the scanner unit. Setting the standby time (b) Select "3", "5", "10", or "15" in the line "STBY PERIOD" - the menu "DISPLAY". The standby time is designated as 3 minutes, 5 minutes, 10 minutes or 15 minutes. Commencing timed transmission (c) Select "ON" in the line "TIMED TX" - the menu "DISPLAY". When this is undertaken, timed transmission begins. 192
(d) Push the MENU key. The menu setting has been completed. 1. After transmitting to the extent of the number of rotations of the scanner unit designated, the system enters the standby mode for the period designated. During standby mode, the echo from the radar disappears from the screen and a timer that shows the remaining time to the next transmission is shown on the display. 2. After completion of the standby period, the system again transmits to the extent of the designated number of rotations of the scanner unit. 3. This process is repeated. CAUTION While timed transmission is in progress, under no circumstances should the scanner unit be approached. While the scanner unit is stopped during the standby period, after completion of such standby period, the scanner unit will resume rotation and may collide with the body and cause injury. Canceling timed transmission (e) Select "OFF" in the line "TIMED TX" - the menu "DISPLAY". The timed transmission has been canceled. (f) Push the MENU key. The menu setting has been completed. Canceling timed transmission while in standby mode (g) Push the STBY key. The timed transmission mode will be canceled and the system will return to normal standby mode. 193
Page 1:
JMA-2343/2344
Page 4 and 5:
Pictorial Indication ●Before Oper
Page 6 and 7:
●Cautions to be used during opera
Page 8 and 9:
──PRECAUTIONS BEFORE OPERATION
Page 10 and 11:
☆When pulse is beating but breath
Page 12 and 13:
機器外観 EQUIPMENT APPEARANC
Page 14 and 15:
Contents PREFACE ·········
Page 16 and 17:
3. Changing the interval between th
Page 18 and 19:
Chapter 5 Maintenance and Inspectio
Page 20 and 21: 9.9 Returning to the Initial Settin
Page 22 and 23: Glossary of Radar Terms A/D ACQ A-S
Page 24 and 25: 1.3 Composition Composition of the
Page 26 and 27: Fig. 1.2 OUTLINE DRAWING OF SCANNER
Page 28 and 29: 1.5 General System Diagram SCANNER
Page 30 and 31: 2 Names and Functions of Control Pa
Page 32 and 33: 2.1.3 Functions of the cross key Th
Page 34 and 35: 2.2 Explanation of Screen Readout P
Page 36 and 37: 2.3 Explanation of Functions within
Page 38 and 39: 2.3.2 Functions within the menu Whe
Page 40 and 41: RADAR SET-UP 1 Set the buzzer sound
Page 42 and 43: 3 Basic Operations 3.1 Flow of Oper
Page 44 and 45: 3.1.1 Turning the power ON and star
Page 46 and 47: 3.2 Monitoring Standby 3.2.1 Changi
Page 48 and 49: Range Range ring interval 3.3.5 Era
Page 50 and 51: 3.3.8 Eradicating radar interferenc
Page 52 and 53: 3.3.10 In case of high waves CAUTIO
Page 54 and 55: (b) Push the left or right side of
Page 56 and 57: 1. Using EBL • An EBL is a straig
Page 58 and 59: 3.3.14 Floating VRM and EBL Use the
Page 60 and 61: • Magnetic bearing display: This
Page 62 and 63: • True bearing display (north-up
Page 64 and 65: Displaying the cursor (a) Push the
Page 66 and 67: Before magnified After magnified 2.
Page 68 and 69: Location designated by the marker C
Page 72 and 73: 3.3.24 Locking a fixed target on th
Page 74 and 75: • The following is an example of
Page 76 and 77: (c) Move the marker using the cross
Page 78 and 79: 3.4 Other Convenient Functions 3.4.
Page 80 and 81: 3.4.4 Displaying the waypoint • I
Page 82 and 83: 3.5.2 In cases of abnormality durin
Page 84 and 85: In order to obtain information on t
Page 86 and 87: 4.2 Returns from a Target The inten
Page 88 and 89: (d) Multiple echo Multiple echoes a
Page 90 and 91: 5 Maintenance and Inspection 5.1 Ge
Page 92 and 93: 5.4 Special Parts JMA-2343 Model Nu
Page 94 and 95: 5.6 Actions to Deal with Abnormalit
Page 96 and 97: 6 After-sales Service ★ When aski
Page 98 and 99: 7 Disposal 7.1 Equipment Disposal D
Page 100 and 101: 8.2 Scanner Unit (NKE-249/250) (1)
Page 102 and 103: 8.3 Display Unit (NCD-4170) (1) Dim
Page 104 and 105: (18) Menu ・FUNCTION ・DISPLAY
Page 106 and 107: 8.4 Rectifier Unit (NBA-797A) (1) D
Page 108 and 109: 9.2 Installing the Scanner Unit 9.2
Page 110 and 111: (2) Precautions to be observed when
Page 112 and 113: 234
Page 114 and 115: 9.3 Installing the Display Unit 9.3
Page 116 and 117: ※ The following should be used as
Page 118 and 119: 9.3.6 Connecting an electromagnetic
Page 120 and 121:
9.5 Cable Assemblies 9.5.1 Inter-un
Page 122 and 123:
9.6 After-installation Adjustments
Page 124 and 125:
9.7 Adjustment Procedures 9.7.1 Gen
Page 126 and 127:
3. Adjusting the tilt angle of the
Page 128 and 129:
9.8.1 Adjustment of the receiver
Page 130 and 131:
9.8.2 Adjusting the noise level Thi
Page 132 and 133:
(i) Adjust the proximate perimeter
Page 134 and 135:
(d) Push the soft key 1 and select
Page 136 and 137:
(b) Select "INITIAL SETTING 2" in t
Page 138 and 139:
● Setting mode MANUAL : This oper
Page 140 and 141:
List of Geodetic Systems No. Name 0
Page 142 and 143:
9.9 Returning to the Initial Settin
Page 144 and 145:
9.10.2 Scanner unit WARNING When pe
Page 146:
9.10.3 Display unit Cleaning the Di
show all

JMA-2343/2344 - ProNav

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?