JMA-2343/2344 - ProNav

More documents

Recommendations

Info

※ The following should be used as the plug side connector for connecting to J3 and J4 Connector Type JRC Code For J3 LTWD-06BFFA-L180 5JCAS00031 For J4 LTWD-08BFFA-L180 5JCAS00027 9.3.5 Connection of the external buzzer CAUTION Only qualified service personnel should perform external buzzer cabling work. Erroneous connection may cause breakdown or defective operation. The 5 pin connector side of the cable equipped with connector (7ZCRD0749) should be attached to EXT2 on the rear panel of display unit after removing the rubber stopper. The 2 pin connector side should be connected to J5 of the display unit main control circuit (CMC-1156). The 3 pin connector need not be. Use the 5 pin connector (Type: LTWD-05BFFA-L180, JRC code: 5JCAS00030) for the plug side connector connected to EXT2. External connector J5 (5 pin) Attach after removing the rubber stopper. Main control circuit (CMC-1156) Power supply circuit (CBD-1596) J5 (2 pin) F1 F2 2 pin connector 238
EXT2 Connector (J5) 1 2 3 5 4 1 EXTBUZ 2 +12V 3 4 5 To external buzzer control Example of connection of an external buzzer 12V relay LTWD-05BFFA-L180 +12V to EXT2 Protective diode Buzzer EXTBUZ Example of Parts Name Manufacturer Type JRC Code Relay Takamizawa LZ12H 5KLAC00033 Diode Hitachi V06C 5TXAE00016 239
Page 1:
JMA-2343/2344
Page 4 and 5:
Pictorial Indication ●Before Oper
Page 6 and 7:
●Cautions to be used during opera
Page 8 and 9:
──PRECAUTIONS BEFORE OPERATION
Page 10 and 11:
☆When pulse is beating but breath
Page 12 and 13:
機器外観 EQUIPMENT APPEARANC
Page 14 and 15:
Contents PREFACE ·········
Page 16 and 17:
3. Changing the interval between th
Page 18 and 19:
Chapter 5 Maintenance and Inspectio
Page 20 and 21:
9.9 Returning to the Initial Settin
Page 22 and 23:
Glossary of Radar Terms A/D ACQ A-S
Page 24 and 25:
1.3 Composition Composition of the
Page 26 and 27:
Fig. 1.2 OUTLINE DRAWING OF SCANNER
Page 28 and 29:
1.5 General System Diagram SCANNER
Page 30 and 31:
2 Names and Functions of Control Pa
Page 32 and 33:
2.1.3 Functions of the cross key Th
Page 34 and 35:
2.2 Explanation of Screen Readout P
Page 36 and 37:
2.3 Explanation of Functions within
Page 38 and 39:
2.3.2 Functions within the menu Whe
Page 40 and 41:
RADAR SET-UP 1 Set the buzzer sound
Page 42 and 43:
3 Basic Operations 3.1 Flow of Oper
Page 44 and 45:
3.1.1 Turning the power ON and star
Page 46 and 47:
3.2 Monitoring Standby 3.2.1 Changi
Page 48 and 49:
Range Range ring interval 3.3.5 Era
Page 50 and 51:
3.3.8 Eradicating radar interferenc
Page 52 and 53:
3.3.10 In case of high waves CAUTIO
Page 54 and 55:
(b) Push the left or right side of
Page 56 and 57:
1. Using EBL • An EBL is a straig
Page 58 and 59:
3.3.14 Floating VRM and EBL Use the
Page 60 and 61:
• Magnetic bearing display: This
Page 62 and 63:
• True bearing display (north-up
Page 64 and 65:
Displaying the cursor (a) Push the
Page 66 and 67: Before magnified After magnified 2.
Page 68 and 69: Location designated by the marker C
Page 70 and 71: Canceling center relocation (a) Pus
Page 72 and 73: 3.3.24 Locking a fixed target on th
Page 74 and 75: • The following is an example of
Page 76 and 77: (c) Move the marker using the cross
Page 78 and 79: 3.4 Other Convenient Functions 3.4.
Page 80 and 81: 3.4.4 Displaying the waypoint • I
Page 82 and 83: 3.5.2 In cases of abnormality durin
Page 84 and 85: In order to obtain information on t
Page 86 and 87: 4.2 Returns from a Target The inten
Page 88 and 89: (d) Multiple echo Multiple echoes a
Page 90 and 91: 5 Maintenance and Inspection 5.1 Ge
Page 92 and 93: 5.4 Special Parts JMA-2343 Model Nu
Page 94 and 95: 5.6 Actions to Deal with Abnormalit
Page 96 and 97: 6 After-sales Service ★ When aski
Page 98 and 99: 7 Disposal 7.1 Equipment Disposal D
Page 100 and 101: 8.2 Scanner Unit (NKE-249/250) (1)
Page 102 and 103: 8.3 Display Unit (NCD-4170) (1) Dim
Page 104 and 105: (18) Menu ・FUNCTION ・DISPLAY
Page 106 and 107: 8.4 Rectifier Unit (NBA-797A) (1) D
Page 108 and 109: 9.2 Installing the Scanner Unit 9.2
Page 110 and 111: (2) Precautions to be observed when
Page 112 and 113: 234
Page 114 and 115: 9.3 Installing the Display Unit 9.3
Page 118 and 119: 9.3.6 Connecting an electromagnetic
Page 120 and 121: 9.5 Cable Assemblies 9.5.1 Inter-un
Page 122 and 123: 9.6 After-installation Adjustments
Page 124 and 125: 9.7 Adjustment Procedures 9.7.1 Gen
Page 126 and 127: 3. Adjusting the tilt angle of the
Page 128 and 129: 9.8.1 Adjustment of the receiver
Page 130 and 131: 9.8.2 Adjusting the noise level Thi
Page 132 and 133: (i) Adjust the proximate perimeter
Page 134 and 135: (d) Push the soft key 1 and select
Page 136 and 137: (b) Select "INITIAL SETTING 2" in t
Page 138 and 139: ● Setting mode MANUAL : This oper
Page 140 and 141: List of Geodetic Systems No. Name 0
Page 142 and 143: 9.9 Returning to the Initial Settin
Page 144 and 145: 9.10.2 Scanner unit WARNING When pe
Page 146: 9.10.3 Display unit Cleaning the Di
show all

JMA-2343/2344 - ProNav

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?