JMA-2343/2344 - ProNav

More documents

Recommendations

Info

3.4.4 Displaying the waypoint • In order to use this function, it is necessary to input of the following information to the display unit: Information on the bearing of the waypoint Information on the distance to the waypoint Information on the ship's speed. Please refer to: "3.6.1 Obtaining information on bearing" "3.6.2 Obtaining information on speed" "3.6.4 Obtaining information on the distance to the waypoint" Display of the waypoint (a) Select "ON" in the line "WAYPOINT" - the menu "DISPLAY". • The bearing, distance and required travel time (when ship speed information has been input) will be displayed. • The route from the ship to the waypoint will be displayed with the following marker. Circle : Position of the waypoint Refer to "2.2 Explanation of Screen Readout" Erasing the waypoint (a) Select "OFF" in the line "WAYPOINT" - the menu "DISPLAY". The waypoint mark, the bearing, distance and required travel time to the waypoint will disappear. 202
3.5 Miscellaneous Considerations 3.5.1 Replacing the battery (BT1) In order to maintain the information that has been set, the battery (BT1) needs to be replaced at regular intervals. (a) Replacing the battery (BT1) [Type: CR2032-FT6-1, SANYO Electric Co, Ltd.] • Please call the dealer servicing your locality for a replacement battery. (b) Reinitializing • The lithium battery maintains the content of the setting of the menu and soft key even when the power is shut off allowing use under the conditions of the last use. • If this battery runs down, all conditions including the menu will automatically be reset. For this reason, initializing is required after replacement of the battery. Attention • When the battery wears down, distance and bearing may become inaccurate. In such cases, the battery should immediately be replaced and initialization undertaken. • In the event immediate replacement of the battery is not feasible, initialization should be undertaken each time the power is turned on as an emergency measure. However, each time the power is shut off, the content that has been set is reset. • Please refer to "9.8 Initial Setting" with respect to details on initialization. 203
Page 1:
JMA-2343/2344
Page 4 and 5:
Pictorial Indication ●Before Oper
Page 6 and 7:
●Cautions to be used during opera
Page 8 and 9:
──PRECAUTIONS BEFORE OPERATION
Page 10 and 11:
☆When pulse is beating but breath
Page 12 and 13:
機器外観 EQUIPMENT APPEARANC
Page 14 and 15:
Contents PREFACE ·········
Page 16 and 17:
3. Changing the interval between th
Page 18 and 19:
Chapter 5 Maintenance and Inspectio
Page 20 and 21:
9.9 Returning to the Initial Settin
Page 22 and 23:
Glossary of Radar Terms A/D ACQ A-S
Page 24 and 25:
1.3 Composition Composition of the
Page 26 and 27:
Fig. 1.2 OUTLINE DRAWING OF SCANNER
Page 28 and 29:
1.5 General System Diagram SCANNER
Page 30 and 31: 2 Names and Functions of Control Pa
Page 32 and 33: 2.1.3 Functions of the cross key Th
Page 34 and 35: 2.2 Explanation of Screen Readout P
Page 36 and 37: 2.3 Explanation of Functions within
Page 38 and 39: 2.3.2 Functions within the menu Whe
Page 40 and 41: RADAR SET-UP 1 Set the buzzer sound
Page 42 and 43: 3 Basic Operations 3.1 Flow of Oper
Page 44 and 45: 3.1.1 Turning the power ON and star
Page 46 and 47: 3.2 Monitoring Standby 3.2.1 Changi
Page 48 and 49: Range Range ring interval 3.3.5 Era
Page 50 and 51: 3.3.8 Eradicating radar interferenc
Page 52 and 53: 3.3.10 In case of high waves CAUTIO
Page 54 and 55: (b) Push the left or right side of
Page 56 and 57: 1. Using EBL • An EBL is a straig
Page 58 and 59: 3.3.14 Floating VRM and EBL Use the
Page 60 and 61: • Magnetic bearing display: This
Page 62 and 63: • True bearing display (north-up
Page 64 and 65: Displaying the cursor (a) Push the
Page 66 and 67: Before magnified After magnified 2.
Page 68 and 69: Location designated by the marker C
Page 70 and 71: Canceling center relocation (a) Pus
Page 72 and 73: 3.3.24 Locking a fixed target on th
Page 74 and 75: • The following is an example of
Page 76 and 77: (c) Move the marker using the cross
Page 78 and 79: 3.4 Other Convenient Functions 3.4.
Page 82 and 83: 3.5.2 In cases of abnormality durin
Page 84 and 85: In order to obtain information on t
Page 86 and 87: 4.2 Returns from a Target The inten
Page 88 and 89: (d) Multiple echo Multiple echoes a
Page 90 and 91: 5 Maintenance and Inspection 5.1 Ge
Page 92 and 93: 5.4 Special Parts JMA-2343 Model Nu
Page 94 and 95: 5.6 Actions to Deal with Abnormalit
Page 96 and 97: 6 After-sales Service ★ When aski
Page 98 and 99: 7 Disposal 7.1 Equipment Disposal D
Page 100 and 101: 8.2 Scanner Unit (NKE-249/250) (1)
Page 102 and 103: 8.3 Display Unit (NCD-4170) (1) Dim
Page 104 and 105: (18) Menu ・FUNCTION ・DISPLAY
Page 106 and 107: 8.4 Rectifier Unit (NBA-797A) (1) D
Page 108 and 109: 9.2 Installing the Scanner Unit 9.2
Page 110 and 111: (2) Precautions to be observed when
Page 112 and 113: 234
Page 114 and 115: 9.3 Installing the Display Unit 9.3
Page 116 and 117: ※ The following should be used as
Page 118 and 119: 9.3.6 Connecting an electromagnetic
Page 120 and 121: 9.5 Cable Assemblies 9.5.1 Inter-un
Page 122 and 123: 9.6 After-installation Adjustments
Page 124 and 125: 9.7 Adjustment Procedures 9.7.1 Gen
Page 126 and 127: 3. Adjusting the tilt angle of the
Page 128 and 129: 9.8.1 Adjustment of the receiver
Page 130 and 131:
9.8.2 Adjusting the noise level Thi
Page 132 and 133:
(i) Adjust the proximate perimeter
Page 134 and 135:
(d) Push the soft key 1 and select
Page 136 and 137:
(b) Select "INITIAL SETTING 2" in t
Page 138 and 139:
● Setting mode MANUAL : This oper
Page 140 and 141:
List of Geodetic Systems No. Name 0
Page 142 and 143:
9.9 Returning to the Initial Settin
Page 144 and 145:
9.10.2 Scanner unit WARNING When pe
Page 146:
9.10.3 Display unit Cleaning the Di
show all

JMA-2343/2344 - ProNav

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?