SATA RAID Drive Enclosure - StarTech.com

Instruction Manual
Monitoring and Troubleshooting
Monitoring drive status
The color of the drives in the Status window indicates the status of the hard disk drives:
Color State Description Resolution
Green Normal Drive is active.
Red
Gray or
Red
Needs Rebuild
Unplugged
Drive is in a failed
state. That is, a write
has occurred to a
SAFE volume while
the disk drive was
offline.
Drive is offline or
unplugged. The
background will
appear red after a
write to
the volume.
Light Blue New drive New drive.
Yellow Rebuilding Drive is being rebuilt.
Purple Wrong slot
There is a mismatch
between the Serial #
and Expected Serial
# because a hard
disk drive has been
installed into the
wrong bay.
Verify the disk is
securely in the bay.
Otherwise, replace
as necessary.
Install the correct
disk drive into the
bay.
Monitoring temperature
The following colors indicate temperature status.
Color Description Resolution
Green
Temperature is normal.
Yellow
Red
Temperature is greater than
50°C (122° F).
Temperature is greater than
53° C (127° F).
Remove object(s) that interfere
with airflow around the Drive
Enclosure
Ensure constant airflow around
the Drive Enclosure. If there is no
airflow, replace the fan. Identify
the drive causing the temperature
increase and replace it.
27