PowerGrip® GT® Belt Drives

PowerGrip ® Twin Power ® Belts
Twin Power Belt Specifications – continued
Standard Twin Power Belts
XL (.200 in.) Belt Lengths
Belt Length Pitch Length No. of Teeth
Code (in) Per Side
TP150XL 15.0 75
TP160XL 16.0 80
TP170XL 17.0 85
TP180XL 18.0 90
TP190XL 19.0 95
TP200XL 20.0 100
TP210XL 21.0 105
TP220XL 22.0 110
TP230XL 23.0 115
TP240XL 24.0 120
TP250XL 25.0 125
TP260XL 26.0 130
TP280XL 28.0 140
TP290XL 29.0 145
TP300XL 30.0 150
TP310XL 31.0 155
TP330XL 33.0 165
TP340XL 34.0 170
Made-To-Order Twin Power Belts
Additional sizes of Twin Power Timing Belts are
available on a made-to-order basis in pitch lengths
of 15 through 140 and in nonstandard widths to the
maximum width shown in Table 9 below.
PowerGrip HTD Belts also are available in the Twin
Power configuration on a made-to-order basis in
lengths from 15 through 180.
Standard tooling must be used. If the desired pitch
length is within the 15 through 140 range and a
mold is not available, tooling will be required.
Table 9
Made-To-Order Twin Power Belting
Pitch Code Belt Pitch Maximum
Width (in)
XL .200 in. 6.0
3M HTD 3mm 6.6
5M HTD 5mm 6.6
Belt Width Code
Width (in)
025 1/4 (.250)
037 3/8 (.375)*
*Stock belt width
XL Belt Widths
NOTE: For additional information on availability contact Gates
Customer Service.
The World’s Most Trusted Name in Belts, Hose & Hydraulics.
43