TM-6710/6710CL High-Speed Progressive Scanning ... - JAI Pulnix
TM-6710/6710CL High-Speed Progressive Scanning ... - JAI Pulnix
TM-6710/6710CL High-Speed Progressive Scanning ... - JAI Pulnix
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Page 20<br />
Operation<br />
Vref2) is between 1V and 0.2V. The controllable range of the reference top voltage (Vtop) is between<br />
1.5V and 3V.<br />
V<br />
Vtop Voltage<br />
3<br />
4<br />
2<br />
A/D Input<br />
Vtop 2.15V<br />
3<br />
2<br />
1<br />
1K (10-bit)<br />
256 (8-bit)<br />
1<br />
0<br />
Vbtm 0.45V<br />
0<br />
255<br />
Counts<br />
Figure 1 Figure 2<br />
Examples:<br />
Command W<br />
“:”, “VT”, “7E”, CR<br />
7EH = Vref top: 126<br />
3AH, 56H, 37H, 45H, 36H, 0DH<br />
Vref (V)<br />
1.2<br />
1<br />
0.8<br />
0.6<br />
0.4<br />
0.2<br />
Function: Write data to the selected pages or calibration<br />
data table.<br />
0<br />
Figure 3<br />
255<br />
Counts<br />
Saving to page (from 0 through 6):<br />
“:”, “W”, “P” - “6”, CR<br />
3AH, 57H, 41H - 36H, 0DH<br />
(Page 0 is factory use only)<br />
Saving the current gain setting to User Table (A) with the “WU” command:<br />
Command L<br />
“:”, “W”, “U”, “A”, CR<br />
3AH, 57H, 55H, 41H, 0DH<br />
Function: Select and read a memory page and set the preprogrammed data. This loads the data from the<br />
preset page location or preset gain table.<br />
Command R<br />
“:”, “L”, “P” - “6”, CR<br />
3AH, 4CH, 50H - 36H, 0DH<br />
Function: Output data values of camera memory (PULNiX software is available).<br />
<strong>TM</strong>-<strong>6710</strong>/<strong>6710</strong>CL <strong>High</strong>-<strong>Speed</strong> <strong>Progressive</strong> <strong>Scanning</strong> CCD Camera
Change language