TM-6710/6710CL High-Speed Progressive Scanning ... - JAI Pulnix

More documents

Recommendations

Info

Page 28 Camera Timing Charts Model: TM-6710/6710CL Master Clock: 50.98_HMz, M= 19.62_ nsec Pixel Clock: 25.49_MHz, P= 39.23_ nsec 3. External Reset Timing Operation Mode: 120 Frames/Second Horizontal Frequency: 30.49_KHz 1H = 32.8_ µsec Digital 1H = 16.4_ µsec Analog External VD B [0 H], (6 µsec) Internal VD F [3 H], (98.4 µsec) FD Q [5 H], (164 µsec) Digital Data A [254 H], (8.33 msec) C [4.5 H], (147.6 µsec) D [249.5 H], (8.18 ms) E [254 H], (8.33 ms) G [5 H], (0.164 ms) H [249 H], (8.17 ms) J [7 H], (0.23 ms) I [2 H], (65.6 µsec) M [18 H], (0.295 ms) K [242 H], (7.94 ms) Q [5 H], (0.164 ms) Analog Video L [3 H], (49.2 µsec) 0 [484 H], (7.94 ms) N [3 H], (49.2 µsec) 4. Async Reset Timing P [6 H], 98.4 µsec) VINIT Trigger Q [1 H], (32.8 µsec) Internal VD U [3 H], (98.4 µsec) FDV Z [5 H], (0.164 ms) Digital Data Q: Internal VD shift = 1H + async shutter speed R [4.5 H]. (147.6 µsec) S [249.5 H], (8.18 ms) T [254 H], (8.33 ms) V [5 H], (0.164 ms) H [249 H], (8.17 ms) X [7 H], (0.23 ms) W [0 H], (3 µsec) AA [18 H] (0.295 ms) Y [237 H], (7.77 ms) Z [5 H], (0.164 ms) Analog Video Z Z [3 H], (49.2 µsec) BB [3 H], (49.2 µsec) CC [484 H], (7.94 ms) DD [6 H], (98.4 µsec) TM-6710/6710CL High-Speed Progressive Scanning CCD Camera
Page 29 Troubleshooting 5 Troubleshooting 5.1 Problems and Solutions Following are troubleshooting tips for common problems. Generally, problems can easily be solved by following these instructions. If the following remedies fail to offer a solution to your problems, please contact a PULNiX representative. 5.1.1 Symptom: No Video Remedies: Check that the following are properly connected and operational. • Power supplies • Power cables • Main power source • Shutter control • Async mode • Lens • Proper level setting as Camera Link CC1 and CC2 5.1.2 Symptom: Dark Video Remedies: Check that the following are properly connected and operational. • Shutter selection • Iris opening on the lens • Proper power (DC level) 5.1.3 Symptom: Non-Synchronized Video Remedies: Check that the following are properly connected and operational. • Proper mode output • Frame grabber software camera selection 5.1.4 Symptom: RS-232 Non-Communication Remedies: Check that the following are properly connected and operational. • Cable connection • Proper serial port selection • Camera has power • Proper Camera Link DLL selection (for TM-6710CL) TM-6710/6710CL High-Speed Progressive Scanning CCD Camera
Page 1: TM-6710/6710CL High-Speed Progressi
Page 5 and 6: ii Table of Contents 1 Introduction
Page 7 and 8: August 30, 2004 TM-6710/6710CL High
Page 9 and 10: Page 3 Introduction 1.4 System Conf
Page 11 and 12: Page 5 Installation 2.2 Camera Setu
Page 13 and 14: Page 7 Installation FIGURE 5. MDR 2
Page 15 and 16: Page 9 Installation D-Sub 9-Pin Con
Page 17 and 18: Page 11 Operation FIGURE 9. Rear Pa
Page 19 and 20: Page 13 Operation 3.3.2 External Sy
Page 21 and 22: Page 15 Operation This feature is e
Page 23 and 24: Page 17 Operation 3.3.6 Progressive
Page 25 and 26: Page 19 Operation This selects a mo
Page 27 and 28: Page 21 Operation 1. Report from RA
Page 29 and 30: Page 23 Operation 3.3.8 Video Outpu
Page 31 and 32: Page 25 Camera Timing Charts 4 Came
Page 33: Page 27 Camera Timing Charts Model:
Page 37 and 38: Page 31 Appendix 6 Appendix 6.1 Spe
Page 39 and 40: Page 33 Appendix FIGURE 17. Glass S
Page 42: Imaging Products JAI PULNiX, Inc. 1

TM-6710/6710CL High-Speed Progressive Scanning ... - JAI Pulnix

Create successful ePaper yourself

Delete template?

Save as template?