Instruction manual, SPT and MPT 31x series transponders

Auxiliary equipment
Floating rope
Dbl. sheet bend)
Minimum
distance
350 mm
(CD 4812)
Minimum
distance
35 mm
Figure 36 Example of transponder with fitted guiding collar and
floating rope
A groove (12 mm wide) is made on the upper guiding collar
unit.
Example of use:
The purpose of this groove is to fit the transponder correctly
when using a funnel for mounting the transponder. The groove
slides over a corresponding guide fin within the funnel. Correct
mounting will restrict rotation of the transponder within the
funnel. The funnel is equipped with a locking pin to secure the
transponder (not supplied by Kongsberg Maritime).
160820/O 93