23.03.2014 Views

Instruction manual, SPT and MPT 31x series transponders

Instruction manual, SPT and MPT 31x series transponders

Instruction manual, SPT and MPT 31x series transponders

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Basic transponder information<br />

L<br />

S<br />

Si<br />

Long tube -indicates that the unit is longer<br />

than st<strong>and</strong>ard, to accommodate a larger<br />

battery<br />

Split transducer<br />

Serial interface<br />

EEx The unit meet the requirements of EN 50<br />

014 -50 020 or VDE0171 “Electrical<br />

apparatus for potentially explosive<br />

atmosphere” respectively<br />

EEx 90<br />

Housing material<br />

As described above, <strong>and</strong> the transducer is<br />

mounted at an angle of 90_ perpendicular<br />

to the longitudinal axes of the transponder<br />

Aluminium is st<strong>and</strong>ard housing material. If Stainless steel is<br />

used, the abbreviation “St” is added to the transponder name<br />

(see example below).<br />

Example: <strong>MPT</strong> 319/DT-St<br />

The example given (<strong>MPT</strong> 319/DT-St) therefore indicates that<br />

the transponder unit is an Multifunction Positioning<br />

Transponder, operating in the 30 kHz b<strong>and</strong>, rated to 1000 meters<br />

depth, with a ± 90º beam width, <strong>and</strong> including the Depth <strong>and</strong><br />

Temperature sensors. The housing material is stainless steel.<br />

Transponder models description<br />

Basic models<br />

<strong>SPT</strong> 314<br />

The <strong>SPT</strong> 314 can only operate as an SSBL transponder to<br />

provide positional information. It is equipped with a ± 45º<br />

beamwidth transducer. All <strong>SPT</strong> 314 models are based on this<br />

basic model.<br />

<strong>SPT</strong> 319<br />

The <strong>SPT</strong> 319 can only operate as an SSBL transponder to<br />

provide positional information. It is equipped with a ± 90º<br />

beamwidth transducer. All <strong>SPT</strong> 319 models are based on this<br />

basic model.<br />

160820/O 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!