Instruction manual, SPT and MPT 31x series transponders

SPT and MPT 31x series
Electronic
chassis
Battery mounting hole
A
B
Battery connector
C
D
Battery top
(Cd30168)
Figure 19 Connecting and mounting the battery
3 Fit the battery onto the chassis mounting holes (4 holes).
4 Mount the four nuts (A-D) and locking washers holding
the battery to the chassis.
5 Assemble the transponder.
Refer to page 78 for details.
Note
Replace the used silica-gel bag with the new bag delivered with
the battery.
6 Check that the unit is correctly assembled and sealed.
7 Perform a functional check before deployment.
How to connect the transponder battery
To connect the battery, the unit must be opened.
Refer to page 64 for details.
60 160820/O