04.04.2014 Views

640-802 CCNA Study Guide - Elktech.org

640-802 CCNA Study Guide - Elktech.org

640-802 CCNA Study Guide - Elktech.org

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Cisco <strong>640</strong>-<strong>802</strong> Exam<br />

Answer: D<br />

Explanation:<br />

Current Ethernet technology typically comes via either copper UTP or fiber cables. In this scenario<br />

the distance between the buildings is only 55 meters so either copper or fiber could be used, as<br />

the distance limitation for 100M UTP Ethernet is 100 meters. However, fiber would be a better fit<br />

as it is not prone to errors that could occur due to the voltage potential differences. Because fiber<br />

is a dielectric material, it's not susceptible to electrical interference. FO-product vendors also claim<br />

that fiber systems make secure communications easier. Interference immunity and lack of<br />

emissions are givens in FO systems and in the fiber medium itself.<br />

QUESTION NO: 310<br />

Users have been complaining that their Frame Relay connection to the corporate site is very slow.<br />

The network administrator suspects that the link is overloaded. Based on the partial output of the<br />

Router# show frame relay pvc command shown in the graphic, which output value indicates to the<br />

local router that traffic sent to the corporate site is experiencing congestion?<br />

A. DLCI = 100<br />

B. last time PVC status changed 00:25:40<br />

C. in BECN packets 192<br />

D. in FECN packets 147<br />

E. in DE packets 0<br />

"Pass Any Exam. Any Time." - www.actualtests.com 194

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!