640-802 CCNA Study Guide - Elktech.org

C. A broadcast address will never be the source address of a frame.
D. Broadcasts only use network layer addressing.
E. A broadcast frame is never forwarded by a switch.
Answer: C
Explanation:
Cisco 640-802 Exam
QUESTION NO: 513
Which command can you use to manually assign a static IPv6 address to a router interface?
A. ipv6 address PREFIX_1::1/64
B. ipv6 autoconfig 2001:db8:2222:7272::72/64
C. ipv6 autoconfig
D. ipv6 address 2001:db8:2222:7272::72/64
Answer: D
Explanation:
QUESTION NO: 514
What is the function of the command switchport trunk native vlan 999 on a trunk port?
A. It designates VLAN 999 for untagged traffic.
B. It blocks VLAN 999 traffic from passing on the trunk.
C. It creates a VLAN 999 interface.
D. It designates VLAN 999 as the default for all unknown tagged traffic.
Answer: A
Explanation:
QUESTION NO: 515
Which command can be used from a PC to verfy the connectivity between host that connect
through path.?
A. tracert address
B. ping address
"Pass Any Exam. Any Time." - www.actualtests.com 366